Complete Kit 93% Heat Recovery Whole House Extract Supply Fan Summer By Pass
Brookvent Aircycle 1.2
3/6 Room Kit - AG4 (internal grilles) x 6
4/8 Room Kit - AG4 (internal grilles) x 8
5/10 Room Kit - AG4 (internal grilles) x 10
50 Metres of Ducting (insulated), Tee pieces and external grilles with all kits
Energy saving efficiency of up to 93%.
Accredited with 'Best Practice' use by the BRE.
SAP Q Listed and approved.
Summer by Pass
In-built Humidity Sensor (Boost activation) Variable: 60% - 90% RH, Factory Set: 70%
Extremely low carbon SFP rating of 0.53 w/l/s. (1 x Wet Room, 1 x Kitchen)
Impressive airflow rate of 40 l/s @ 250 Pa.
Trickle and boost settings for each fan
Frost Protection, Factory Set: 5 Degrees Cel.
Wall mountable or Floor mountable
Please read the following facts before choosing a Heat Recovery Unit
A Heat Recovery Unit less than 70% efficient does not meet UK Building Regulations as a heat recovery unit with an efficiency level under 70% is simply not going to give back the benefits you have invested.
The BRE (Building Research Establishment) independently test heat recovery units and publish results (Appendix SAP Q) for you to see. The tests are carried out in real situations and are independent.
Here we are offering one of the most efficient Heat Recovery Units on the market.
How does it work
A heat recovery ventilation unit is mounted in your loft and ducted to outside to intake and extract air outlets.
Extract grilles are fitted in your kitchen and wet rooms and ducted to the heat recovery unit.
Supply air grilles are fitted in your habitable rooms; living rooms and bedrooms.
Each wet room is fitted with an extract valve, and each habitable room with a supply grille.
Within the heat recovery unit, heat from the extracted dirty, moist air is transferred to the supply air and pumped back into your house.
There are no products matching the selection.
No Faqs Found !