Cooker/Tumble Dryer Acc

Manrose Cooker hood kit Kitchen Fan Extract hood Ducting 120mm / 125mm 5
translation missing: en.products.product.regular_price £12.84
translation missing: en.products.product.regular_price £12.84

Manrose Cooker hood kit - 125mm dia (Pipe size is 135mm dia)

Product 

Comprises: Gravity flap wall outlet, Aluminium flex(semi-rigid) 1.5m length, Hose clip, Screws and plugs

Pipe size is 130mm dia.

Conforms to part F building regulations.

Full specification on request.

Actual appearance/scale of product may vary dependant on size. 

Uses 

For use in domestic kitchen extraction applications.


MANROSE 4
£52.99
MANROSE 4" M200 LM200 Slimline Centrifugal Fan Standard Pullcord Humidity Timer

MANROSE 4" M200 LM200 Slimline Centrifugal Fan Standard Pullcord Humidity Timer

The M200 range of centrifugal bathroom fans are designed for ducted ventilation of internal bathrooms and WCs.

M200 is designed for surface or flush mounting due to the unique cassette design of the motor and impeller assembly.

The rear spigot can be mounted in 2 positions allowing for rear exit or connecting to a vertical ducted system.

Designed for wall or ceilings mounting and discharging via rigid, flexible, or flat ducting.

Available as a wall model with the addition of a wall fitting kit. 

98mm spigot for speedy installation

Available in Standard, Pullcord, Timer and Humidity versions

Provides required performance of 54m3/h (15l/s) to comply with the Building Regulations. Also, available as part of the Part L compliant range.

 

Flush or surface mountable

 

Adjustable rear or side exit spigot


Technical details

M200S Single speed fan with integral back draught shutters. Light or remote switch operation. Meets the requirements of Part F Building Regulations 2006, for installed performance

 LM200S As above but Part L compliant.


 M200P Single speed fan with integral back draught shutters. Pullcord operation. Meets the requirements of Part F Building Regulations 2006, for installed performance


LM200P As above but Part L compliant.

 

M200T Single speed fan with integral back draught shutters. Adjustable 1 – 20 minutes electronic over run timer. Meets the requirements of Part F Building Regulations 2006, for installed performance


LM200T As above but Part L compliant.


M200H Single speed fan with integral back draught shutters. Integral adjustable humidistat 20-90% RH. Meets the requirements of Part F Building Regulations 2006, for installed performance


LM200H As above but Part L compliant.


M200HP Electronic Humidity control with pullcord over ride switch requires no switched live.


LM200HP As above but Part L compliant.


M200 Maximum pressure: Sound volume:
 36.0

dB(A) Maximum operating temperature: 40ºC


Swiftair 100mm Tumble Dryer Venting Kit Wall Ducting Gravity Ventilation Fan Kit
translation missing: en.products.product.regular_price £8.99
translation missing: en.products.product.regular_price £8.99
Swiftair 100mm Tumble Dryer Venting Kit Wall Ducting Gravity Ventilation Fan Kit

Swiftair 100mm Tumble Dryer Venting Kit Wall Ducting Gravity Ventilation Fan Kit

Tumble Dryer complete kit includes

1 metre of PVC Ducting 
2 x Threaded Connectors 
1 x Wall plate 
1 x Gravity Grille (please select colour)


Swiftair 100mm Tumble Dryer Venting Kit Wall Ducting Cowl Ventilation Fan Kit
translation missing: en.products.product.regular_price £9.99
translation missing: en.products.product.regular_price £9.99
Swiftair 100mm Tumble Dryer Venting Kit Wall Ducting Cowl Ventilation Fan Kit

Swiftair 100mm Tumble Dryer Venting Kit Wall Ducting Cowl Ventilation Fan Kit

Tumble Dryer complete kit includes

1 metre of PVC Ducting 
2 x Threaded Connectors 
1 x Wall plate 
1 x Cowl Grille (please select colour)


Swiftair 100mm Indoor tumble dryer venting kit wall ducting ventilation fan
translation missing: en.products.product.regular_price £10.99
translation missing: en.products.product.regular_price £10.99

100mm (4") systems
Indoor condensation trap
1m 4" flexible ducting
Quick and easy fit
White
Quick and easy fit

For best results please cover the bottom with ice cubes or fill with COLD water to a depth of 40mm


Manrose FLAT tumble dryer venting kit wall ducting ventilation fan kit 7207W
translation missing: en.products.product.regular_price £15.99
translation missing: en.products.product.regular_price £15.99

MANROSE - Flat tumble dryer ducting kit

Product 

External White Cowl with Gravity grille (110 x 54)
350mm long x 110 x 54 duct
Flat to Round adapter
Round Wall Plate (100mm)
Threaded Hose Connector (100mm)

Ducting will need to beused between the Flat to round adaptor and the threaded hose connector

Uses 

For use with domestic tumble dryers


Manrose Cooker hood kit Kitchen Fan Extract hood with Ducting 150mm 6
translation missing: en.products.product.regular_price £15.59
translation missing: en.products.product.regular_price £15.59


Product
 

Comprises: Gravity flap wall outlet, Aluminium flex(semi-rigid) 1.5m length, Hose clip, Screws and plugs. 
Pipe size is 160mm dia. 
Conforms to part F building regulations. 
Full specification on request. 
Actual appearance/scale of product may vary dependant on size.
 

Uses 

For use in domestic kitchen extraction applications.

Hole Size for Wall 

You will need to drill a 173mm hole for the 6" 150mm Cooker hood kit


Manrose Cooker hood kit Kitchen Fan Extract hood Ducting 100mm 4
translation missing: en.products.product.regular_price £11.09
translation missing: en.products.product.regular_price £11.09

Product

Comprises: Gravity flap wall outlet, Aluminium flex (semi-rigid) 1.5m length, Hose clip, Screws and plugs. Sizes are nominal. Pipe size is 105mm dia. Conforms to part F building regulations. Full specification on request. Actual appearance/scale of product may vary dependant on size.

Uses

For use in domestic kitchen extraction applications.

Hole Size for Wall

You will need to drill a 112mm hole for the 4" 100mm Cooker hood kit


Manrose 4
translation missing: en.products.product.regular_price £119.99
translation missing: en.products.product.regular_price £119.99

The Continuum fan is designed to provide silent, continuous ventilation to any W.C., bathroom, utility room or kitchen. It can be mounted on walls or ceilings, requires low maintenance, includes a long life, low energy motor and is designed for automatic, trouble free operation.

Provides an alternative to higher priced filter less fans, without compromising on function or performance.

One fan for all rooms - W.C., Bathroom or Kitchen - mains and SELV versions available

Low energy motor - saving running costs with only 1.5 Watts at trickle speed

Easy clean and filter less - reducing maintenance

It is designed for surface or flush mounting due to the unique cassette design of the motor and impeller assembly. The rear spigot can be mounted in 2 positions allowing for rear exit or connecting to a vertical ducted system

98mm spigot for speedy installation on any 100mm ducting – Rigid or flexible duct can be used

Integrated humidity sensor providing automatic operation when needed

Designed to run continuously with a boost function to comply with Part F

Model Detail

The fan runs continuously on a trickle speed. An optional single boost speed (two speeds available, lower or higher boost dependant on requirement) can be selected at installation.

The integral pullcord switches the fan on and off to the selected boost speed.

An integral, adjustable humidity sensor will also boost the fan to the selected speed.

An integrated overrun timer activates when the humidity drops to the pre-set level.

An integrated switch live also enables remote switching to boost.

When the remote switch is deactivated the fan will also overrun for the period set at installation.

The LED will come ON when either the switched live, pull cord or humidity sensor is activated.


Manrose 4
translation missing: en.products.product.regular_price £136.99
translation missing: en.products.product.regular_price £136.99

The integral pullcord switches the fan on and off to the selected boost speed.

 An integral, adjustable humidity sensor will also boost the fan to the selected speed.

An integrated overrun timer activates when the humidity drops to the pre-set level.

An integrated switch live also enables remote switching to boost.

When the remote switch is deactivated the fan will also overrun for the period set at installation.

 The LED will come ON when either the switched live, pull cord or humidity sensor is activated.

One fan for all rooms - W.C., Bathroom or Kitchen - mains and SELV versions available

 Low energy motor - saving running costs with only 1.5 Watts at trickle speed

Easy clean and filter-less - reducing maintenance

It is designed for surface or flush mounting due to the unique cassette design of the motor and impeller assembly. The rear spigot can be mounted in 2 positions allowing for rear exit or connecting to a vertical ducted system

98mm spigot for speedy installation on any 100mm ducting – Rigid or flexible duct can be used

Integrated humidity sensor providing automatic operation when needed

Designed to run continuously with a boost function to comply with Part F


Manrose 150mm 6
translation missing: en.products.product.regular_price £44.99
translation missing: en.products.product.regular_price £44.99

MANROSE - WF150AP - 3 Year Warranty 

- Comes with Pullcord to turn fan on and off

Designed for window mounting, the efficient and easy to install range of 150mm (6") fans. 

This comprehensive range are suited for use in larger bathrooms, utility rooms, shops, offices,Kitchens and restaurants. 

The 150mm (6") series has an impressive extract rate of 230m³/hr, 64 litres per second. 

The units are all manufactured using high ABS thermoplastics for strength and durability, aesthetics and easy cleaning.

Power is provided by a single phase induction motor with pre-oiled bearings for a long, maintenance free life. 

More information please click here: http://www.manrose.co.uk/specifications/6wallandwindow.pdf 

Installation

Designed for window mounting (bigger screws maybe need for different thickness's of glass)

Electrical

220-240V - AC 50Hz.

Single phase consuming 25 watts. These fans are double insulated and do not require an earth. All wiring must comply with current IEE regulations.

A double pole (DP) isolating switch, having a contact separation of at least 3mm in all poles, must be used with a 3 amp fuse fitted.

The fan must not be accessible to a person using either the shower or bath and mounted a minimum of 1.8m from the floor.

Technical Specification

• Maximum pressure: 50 p.a.
• Fan speed: 2400 r.p.m.
• Sound volume: 40.0 db(A)

• Maximum operating temperature: 40°C


Manrose 100mm tumble dryer venting kit wall ducting ventilation fan kit 7208W
translation missing: en.products.product.regular_price £14.99
translation missing: en.products.product.regular_price £14.99

Manrose Tumble dryer kit - 100mm dia - 7208W

Product 

Cowl flap wall outlet (gravity flap inside)
350mm Pipe, 
Wall plate 
End Spigot (Tumble dryier ducting will screw in side for best results please use tape to fix)

Conforms to part F building regulations. Full specification on request.


Manrose 100mm tumble dryer venting kit wall ducting ventilation fan kit 41703
translation missing: en.products.product.regular_price £14.99
translation missing: en.products.product.regular_price £14.99

Manrose Tumble dryer kit - 100mm dia

Product 

Comprises: Gravity flap wall outlet, Aluminium flex, Wall plate and hose clip, PVC flex 1.5m length, Connector with foam disc, Ties screws and plugs. Sizes are nominal. Conforms to part F building regulations. Full specification on request. 

You will need a 115mm for the wall ducting


Manrose 100mm Indoor tumble dryer venting kit wall ducting ventilation fan 41704
translation missing: en.products.product.regular_price £14.99
translation missing: en.products.product.regular_price £14.99

Manrose Indoor Tumble Dryer Kit 41704

 

100mm (4") systems

Indoor condensation trap

1m 4" flexible ducting

Quick and easy fit

White

Quick and easy fit

 

For best results please cover the bottom with ice cubes or fill with COLD water to a depth of 40mm


100 Or 50 Cable Ties Tie Wraps Nylon Zip Ties Strong Long Ducting Up To 160mm
£9.59
Natural Coloured Cable Ties 
suitable for ducting up to 160mm 
total cable tie length: 530mm x 4.8mm
100 (4
£10.98
Cooker hood kit - 100,125 or 150mm dia
 
Comprises:
Gravity Grille White (4" will have 3 Flaps)
Aluminium flex 5m or 10m length
2 x Hose clip

Login