Swiftair SCT125 ECO dMEV Trickle/Boost Fan

Swiftair SCT125 ECO dMEV Trickle/Boost Fan
Regular price £45.00

 

125mm continuous running panel axial fan for bathrooms and kitchens.

 

Discreet styling with flat facia reducing the impact the fan has on interior design.

Suitable for wall or panel mounting using the appropriate fixing kit.

Designed to comply with Building Regulations for whole house system ventilation, this sleek fan can be used in a wet room under System 3 of Building Regulations Approved Document F.

This attractive fan is also very energy efficient.

 

Why choose continuous running fans?

Continuous running fans, like the Continuous range, have been designed to meet the requirements of the Building Regulations for bathrooms, kitchens, utility rooms and toilets (other models available).

The fan is designed to run all of the time, keeping homes fresh, healthy and free from condensation.

Model Information:

Standard

In the basic version, the fan must be connected to a separate switch for switching on/off the second gear and its reduction in continuous operation mode. When it needs to be switched off completely, a double switch must be used (not included in the product).

Timer

The SCT100 ECO dMEV Trickle Boost Fan has the ability to manually shift gears via a switch on the building's electrical installation. The fan can be connected via two different methods, and after resetting the switch to its original position, it will shift back to a lower gear after 30 minutes.

Humidity

The unit's controller regulates the speed of fans equipped with a humidity sensor (H), regardless of how it is connected. Should the humidity exceed 70%, the fan automatically shifts to its second gear. It returns to the first gear after 15 minutes when the humidity dips below 70%. To increase speed, a separate switch or a double switch' second key must be activated; after 15 minutes, it shifts back to the original setting.

PIR

Equipped with a motion sensor (PIR), the SCT100 ECO dMEV Trickle Boost Fan will switch to its second gear if it detects a presence in the room for more than 60 seconds. After 15 minutes without movement, the fan will drop its speed to the first gear.

 

What does it do?

The fan is designed to run continuously at a very low rate and boost automatically when required.

The low running rate means it has extremely low noise levels.

 

How will it help?

This fan will help prevent the build up of moisture in the home by removing steam and odours.

This will help reduce the risk of black mould forming on walls and behind cupboards.


220-240 V/AC. 50Hz single phase powering a low energy motor.

These fans are double insulated and do not require an earth.

All wiring must comply with current IEE regulations.

 

 

IP Rating

IPX4


Types/Spigot Size

SCT125 - 120mm (5")

Wattage

125 - 6/8w



Air Flow (Free Air)
125 - 55/100 m3/h


PA

125 - 6/12


Sound Level dB(A)
125 - 24/32

Models - Timer (T) & Humidistat (H)

Models - Standard (S) Timer (T) Humidistat (H) PIR ontion Sensor (PIR)

Continuous mechanical extract ventilation (MEV)can be either a whole house centralised MEV system, or localised decentralised MEV fan.

The centralised continuous MEV system is typically located in a loft space or hallway cupboard. Multiple ducts run from the unit to the kitchen, bathroom, ensuites and other wet rooms of a property to simultaneously draw moisture laden air from these wet rooms to control humidity levels.

Decentralised continuous MEV (dMEV) are individual room fans which operate continuously to draw moisture from either the bathroom, kitchen, utility room or other wet room. Continuous mechanical systems should include either manual or automatic controls (i.e. humidity sensors) to operate on between trickle and boost modes.

The minimum extract rates for continuous extract systems are shown here in Table 1.2 (Boost rate). The minimum whole dwelling ventilation rates by the number of bedrooms are shown in Table 1.3 (trickle rate for the whole dwelling).

In stock Sold out Sold out (Backorder available)

 

125mm continuous running panel axial fan for bathrooms and kitchens.

 

Discreet styling with flat facia reducing the impact the fan has on interior design.

Suitable for wall or panel mounting using the appropriate fixing kit.

Designed to comply with Building Regulations for whole house system ventilation, this sleek fan can be used in a wet room under System 3 of Building Regulations Approved Document F.

This attractive fan is also very energy efficient.

 

Why choose continuous running fans?

Continuous running fans, like the Continuous range, have been designed to meet the requirements of the Building Regulations for bathrooms, kitchens, utility rooms and toilets (other models available).

The fan is designed to run all of the time, keeping homes fresh, healthy and free from condensation.

Model Information:

Standard

In the basic version, the fan must be connected to a separate switch for switching on/off the second gear and its reduction in continuous operation mode. When it needs to be switched off completely, a double switch must be used (not included in the product).

Timer

The SCT100 ECO dMEV Trickle Boost Fan has the ability to manually shift gears via a switch on the building's electrical installation. The fan can be connected via two different methods, and after resetting the switch to its original position, it will shift back to a lower gear after 30 minutes.

Humidity

The unit's controller regulates the speed of fans equipped with a humidity sensor (H), regardless of how it is connected. Should the humidity exceed 70%, the fan automatically shifts to its second gear. It returns to the first gear after 15 minutes when the humidity dips below 70%. To increase speed, a separate switch or a double switch' second key must be activated; after 15 minutes, it shifts back to the original setting.

PIR

Equipped with a motion sensor (PIR), the SCT100 ECO dMEV Trickle Boost Fan will switch to its second gear if it detects a presence in the room for more than 60 seconds. After 15 minutes without movement, the fan will drop its speed to the first gear.

 

What does it do?

The fan is designed to run continuously at a very low rate and boost automatically when required.

The low running rate means it has extremely low noise levels.

 

How will it help?

This fan will help prevent the build up of moisture in the home by removing steam and odours.

This will help reduce the risk of black mould forming on walls and behind cupboards.


220-240 V/AC. 50Hz single phase powering a low energy motor.

These fans are double insulated and do not require an earth.

All wiring must comply with current IEE regulations.

 

 

IP Rating

IPX4


Types/Spigot Size

SCT125 - 120mm (5")

Wattage

125 - 6/8w



Air Flow (Free Air)
125 - 55/100 m3/h


PA

125 - 6/12


Sound Level dB(A)
125 - 24/32

Models - Timer (T) & Humidistat (H)

Models - Standard (S) Timer (T) Humidistat (H) PIR ontion Sensor (PIR)

Continuous mechanical extract ventilation (MEV)can be either a whole house centralised MEV system, or localised decentralised MEV fan.

The centralised continuous MEV system is typically located in a loft space or hallway cupboard. Multiple ducts run from the unit to the kitchen, bathroom, ensuites and other wet rooms of a property to simultaneously draw moisture laden air from these wet rooms to control humidity levels.

Decentralised continuous MEV (dMEV) are individual room fans which operate continuously to draw moisture from either the bathroom, kitchen, utility room or other wet room. Continuous mechanical systems should include either manual or automatic controls (i.e. humidity sensors) to operate on between trickle and boost modes.

The minimum extract rates for continuous extract systems are shown here in Table 1.2 (Boost rate). The minimum whole dwelling ventilation rates by the number of bedrooms are shown in Table 1.3 (trickle rate for the whole dwelling).

Delivery:

Dispatch cut off point 12:00pm

(if you order after this time you item will be dispatched the following working day)

Free carriage only apply's to the below if we can use royal mail if the item is to large we will call to discuss as there is other options available.

Postcodes Highlands: FK17-22, G83, IV1-28, IV33-39, KW1-3, KW5-14, PA21-33, PA35-40, PH18-26, PH30-42, AB44-56, IV30-32
Islands: HS1-9, IV40-51,IV55-56,KA27,KA28,KW15-17,PA20,PA34,PA41-48,PA60-78,PH42-44,ZE1-3, JE, GY, IM, TR21-25 (ALL ISLANDS APPLY)
Northen Ireland: BT

Customer Reviews

No reviews yet
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)

Login