6" 150mm Extract Fans

XFA150
£68.00
£68.00
These can be ordred when out of stock (there may be a delay of upto 7 days depending on delivery times from Manrose) - Designed for wall, ceiling or window mounting, the Automatic extractor fan range is available in ten options, all incorporating thermoactivated internal shutters behind the interior grille which open silently approximately 45 seconds after the fan is switched on. The range is available in three sizes - 150mm (6"). The extract rate of the 150mm (6"), has a maximum performance of 230m3 /hr, 64 litres per second....
Swiftair SA150 Extractor Fan
£17.00
£17.00
SA is our wall/ceiling extractor fan perfect for any bathroom, utility or Kitchen, each unit has a back draught shutter attached to stop any unwanted drafts from entering from outside. IP Rating: IPX4 Types/Spigot Size SA150 - 150mm (6") Models - Standard (S), Timer (T) & Humidistat (H) Standard Model (S) - Turns on and off, Live and Neutral needed Pull Cord Model (P) - Turns on and off via pull cord attached, Permanent Neutral and Permanent Live needed (Can't be ceiling mounted) Timer Model (T) - Turns on and when switched off will run on for the...
Round wall ceiling extractor fan
£13.99
Model: SRD For constant or periodic exhaust ventilation of bathrooms, kitchens and other domestic compartments.   Case and impeller are made from the high-quality ABS-plastic, resistant to ultraviolet.   The motor is equipped with overheating protection.   Fixing to the mounting place is carried out by means of screws.  - Types/Spigot Size SRD150 - 150mm (6") - Models - Standard (S) & Timer (T) - Wattage SRD150 - 22w - Air Flow (Free Air) SRD150 - 270 m3/hr - Sound Level dBA (3m) SRD150 - 38
Manrose RT DECO150 6" White or Chrome Extractor Fan
£54.00
These can be ordred when out of stock (there may be a delay of upto 7 days depending on delivery times from Manrose) - Performance The extract rate of all models is 220m³hr - Additional Data Maximum pressure: 50 p.a. Fan speed: 2400 r.p.m. Sound volume: 41.0 dB(A) Maximum operating temperature 40° C  Attractively styled in high gloss ABS thermoplastics for modern appearance and ease of cleaning designed for easy installation and can be wall, ceiling or window mounted. We offer three options; Standard model , Timer model which incorporate...
Swiftair SAS150A Extractor Fan Automatic Shutter
£22.00
A distinctive feature of the SAS fan is the automatic shutters (Please allow 40 secounds to open and fully close). This design is necessary to combat reverse traction and is indispensable for rooms where regular, but not constant ventilation is needed. SAS is also has other options: timer & humidity sensor.  This will help the unit with changes within the room and respond. IP Rating: IP24 Types/Spigot Size SAS150A - 150mm (6") Models - Standard (S), Timer (T) & Humidistat (H) Standard Model (S) - Turns on and off, Live and Neutral needed Timer Model (T) -...
SAQ 4" 5" 6" PIR Sensor Timer Low Noise Quiet Extractor Shower Bathroom Fan
Translation missing: en.products.product.regular_price £39.99
Translation missing: en.products.product.regular_price £39.99
  6" 150mm Only 20 Watts, 240 M3/hour ,  33 dB(A)   Fly Screen Please Note: PIR Sensor is on the bottom left of the fan and is a small circle (not on picture) Applications Continuous or periodic exhaust ventilation of bathroom, showers, kitchens and other utility spaces. Compatible with 100mm ducts. Design Modern design. The casing and the impeller are made of high-quality durable ABS plastic, UV resistant. The intellectual impeller design makes the fan efficient and has a longer life span. Insect screen. Protection rating IP34 Motor Reliable and...
Manrose 6" 150mm Extractor Fan White Chrome Low Profile LP150 Standard Timer LV
£48.00
These can be ordred when out of stock (there may be a delay of upto 7 days depending on delivery times from Manrose) - Models - LP150SSW - LP150SSC - LP150STW - LP150STC - The Manrose Lo Profile fan has a unique design which enables it to fit unobtrusively into any wall or ceiling.  Its flush fitting allows the fan to blend into the decor of the room.  Long life motor.  Only 10mm profile.  Easy to install & maintain.  Designed for Wall or Ceiling Mounting. Designed to comply with the...
Manrose WF Range 4" 5" 6" Extractor Bathroom Wall Ceiling Window Fan
£59.00
These can be ordred when out of stock (there may be a delay of upto 7 days depending on delivery times from Manrose) - Designed for wall,ceiling or window mounting, this comprehensive range offers a wide selection of models for use in bathrooms and toilets. The units are all manufactured using high gloss ABS thermoplastics for strength and durability, aesthetics and easy cleaning. Power is provided by a single phase induction motor with pre-oiled bearings for a long maintenance-free life Designed to comply with building regulations on ventilation (F1) WF100P/WF120P/WF150BP -...
Manrose Standard On/Off 150mm 6" Window Extractor Fan + Internal Shutters WF150A
Translation missing: en.products.product.regular_price £51.00
Translation missing: en.products.product.regular_price £51.00
MANROSE - WF150A (Standard Model On/Off) - 3 Year Warranty  - Automatic window fan Standard model Designed for wall or ceiling mounting, the efficient and easy to install range of 150mm (6") fans.  This comprehensive range are suited for use in larger bathrooms, utility rooms, shops, offices,Kitchens and restaurants.  The 150mm (6") series has an impressive extract rate of 230m³/hr, 64 litres per second.  The units are all manufactured using high ABS thermoplastics for strength and durability, aesthetics and easy cleaning. Power is provided by a single phase induction motor...
Manrose XF150 Range Extractor Bathroom Standard Timer Pullcord Humidity 6"
£43.00
£43.00
These can be ordred when out of stock (there may be a delay of upto 7 days depending on delivery times from Manrose) - Designed to work effectively in kitchens, the 150mm (6") axial flow kitchen fans are quiet, efficient and can be wall or ceiling.   Incorporating the latest technology, the 150 series has been designed for simple installation and has a powerful extract rate of 230m3 /hr 64 litres per second for the XF version and 220m3 /hr 62 litres per second on the XF150.   The range...
Manrose XF150 Extractor Fan Range
£70.00
These can be ordred when out of stock (there may be a delay of upto 7 days depending on delivery times from Manrose) XF150B Range   Designed for wall, ceiling or window mounting, the efficient and easy to install range of 150mm (6") extractor fans are available in twelve options, and are an alternative style and design to the traditional 6" kitchen style.    The fans are suited to larger bathrooms, utility rooms, shops, offices, restaurants, etc. Power is provided by a single phase induction motor with pre-oiled bearings for...
Industrial Commercial Roof Ventilator Heavy Duty Extractor Fan Cowl
£160.00
ABS plastic ball bearings IPX4 maximum operating temperature 40°C 1 years warranty SD-series roof fans are designed for ventilating utility buildings, as well as warehouses with a low level of air pollution. Fans designed for vertical operation are adapted for installation on roofs with a maximum pitch of 15°. They have a much-higher compression than traditional fans, so they can work with central exhaust-ventilation systems. Thanks to the use of 3-speed motors, it is possible to adjust the fan’s parameters to the user’s needs, depending on the connection method.

Login