Heat Recovery
You will get Ducting, T's (if needed), 1 x Alu Tape 45m, and Grilles
1-2 room kit - 2 internal grilles
3 room kit - 3 internal grilles
4 room kit - 4 internal grilles
HRU100 (CFLO100) unit does 27.7 l/s @ Free Air
Remember the more ducting, Bends & Grilles you use the less performance from the fan
2 room kit Example
Extract: bathroom (8 l/s)
Supply: Hall way (6 l/s)
3 Room Kit Example
Extract: En Suit + Bathroom (16 l/s)
Supply: Hall Way (6 l/s)
4 Room Kit Example
Extract: Toilet + En Suit + Bathroom (22 l/s)
Supply: Hall Way (6 l/s)
Extract Rates need when using continuous Ventilation (boost)
Kitchen - 13 l/s
Utility - 8 l/s
Bathroom - 8 l/s
Sanitary Accommodation - 6l/s
If you want to buy some Acoustic Ducting please see: Item number: 280981345234
Wall In line Void/Loft Mounted Heat Recovery Unit
Boost switch comes wired to unit (plug straight in)
** There should never be two lives going to the unit at the same time **
Comes with easy unscrew lid and condensation drain
Extract Air Performance
Boost – 100 m3/hour
Trickle – 30 m3/hour
Intake Air Performance
Boost – 100 m3/hour
Trickle – 30 m3/hour
Power Consumption
Boost - 25w
Trickle – 20w
Features
Designed to run continuously and provide adequate ventilation for bathroom, en suite, shower room, wet room.
Will provide up to 75% heat recovery
(As air is extracted the unit will recover up to 75% of the heat and add it to clean fresh air, and pump it back into your house.)
Eliminate mould and control condensation
Trickle/Boost Option
Loft/void space mounting.
Wall In line Void/Loft Mounted Heat Recovery Unit Only
Unit label airflow is incorrect unit does 550 m3/hr on full speed
Boost switch comes wired to unit (plug straight in)
** There should never be two lives going to the unit at the same time **
Comes with easy unscrew lid and condensation drain
Please note all airflows are at free air (No pressure)
Features
W415 x H255 x L450
70mm added to width for terminal box
60mm spigot length needs to be added to length
speed 1 : 54dB(A)
speed 2 : 52dB(A)
speed 3 : 47dB(A)
speed 4 : 43dB(A)
speed 5 : 38dB(A)
speed 6 : 34dB(A)
speed 7 : 28dB(A)
Designed to run continuously and provide adequate ventilation for a bathroom, en suite, shower room, wet room etc.
Will provide up to 75% heat recovery
(As air is extracted the unit will recover up to 75% of the heat and add it to clean fresh air, and pump it back into your house.)
6" 150mm Spigots on unit
Comes with 7 speeds controller is wired to 2 for trickle and boost
Eliminate mould and control condensation
Trickle/Boost Option included
Loft/void space mounting.
Condensation Drain fitted to bottom of Unit
Boost switch comes wired to unit (plug straight in)
** There should never be two lives going to the unit at the same time **
Comes with easy unscrew lid and condensation drain
Extract Air Performance
Boost – 100 m3/hour
Trickle – 30 m3/hour
Intake Air Performance
Boost – 100 m3/hour
Trickle – 30 m3/hour
Power Consumption
Boost - 25w
Trickle – 20w
Features
Designed to run continuously and provide adequate ventilation for a single bathroom, en suite, shower room, wet room.
Will provide up to 75% heat recovery
(As air is extracted the unit will recover up to 75% of the heat and add it to clean fresh air, and pump it back into your house.)
Eliminate mould and control condensation
Trickle/Boost Option
Loft/void space mounting.
Condensation Drain fitted to bottom of Unit
If kit is needed please see our SHOP examples below
HRU100 (CFLO100) unit does 27.7 l/s @ Free Air
Remember the more ducting, Bends & Grilles you use the less performance from the fan
2 room kit Example
Extract: bathroom (8 l/s)
Supply: Hall way (6 l/s)
3 Room Kit Example
Extract: En Suit + Bathroom (16 l/s)
Supply: Hall Way (6 l/s)
4 Room Kit Example
Extract: Toilet + En Suit + Bathroom (22 l/s)
Supply: Hall Way (6 l/s)
Extract Rates needed when using continuous Ventilation (boost)
Kitchen - 13 l/s
Utility - 8 l/s
Bathroom - 8 l/s
Sanitary Accommodation - 6l/s
HRU100 Heat Recovery Unit
Boost Switch
100mm Internal Circular Grilles White x 2 (E.g. 1 Extract, 1 Supply)
100mm External Fixed Louvre Grille x 2
Alu Duct x 1 (10 meter inc)
Alu Tape 45m x 1
Void/Loft Mounted Heat Recovery Unit
Boost switch comes wired to unit (plug straight in)
** There should never be two lives going to the unit at the same time **
Comes with easy unscrew lid and condensation drain
Extract Air Performance
Boost – 100 m3/hour
Trickle – 30 m3/hour
Intake Air Performance
Boost – 100 m3/hour
Trickle – 30 m3/hour
Power Consumption
Boost - 25w
Trickle – 20w
Features
Designed to run continuously and provide adequate extract ventilation for a single bathroom, en suite, shower room, wet room.
Will provide up to 75% heat recovery
(As air is extracted the unit will recover up to 75% of the heat and add it to clean fresh air, and pump it back into your house.)
Eliminate mould and control condensation
Trickle/Boost Option
Loft/void space mounting.
Condensation Drain fitted to bottom of Unit
Please choose ducting, fittings and grilles from our eBay shop or call 01564 703737for a quote!
Please select what you require above
In this kit you will receive the following:
CFLO250 unit x 1
Reducer 6" to 5" x 4
External grilles x 2
Tee pieces to match selection
Insulated ducting x 5 (50m Total 5")
Internal grilles to match the selection
3 to 6 room kit - 6 internal Grille
4 to 8 room kit - 8 internal Grilles
5 to 10 room kit - 10 internal grilles
Alu Tape x 1
Wall In line Void/Loft Mounted Heat Recovery Unit Only
Unit label airflow is incorrect unit does 550 m3/hr on full speed
Boost switch comes wired to unit (plug straight in)
** There should never be two lives going to the unit at the same time **
Comes with easy unscrew lid and condensation drain
Please note all airflows are at free air (No pressure)
Features
W415 x H255 x L450
70mm added to width for terminal box
60mm spigot length needs to be added to length
Designed to run continuously and provide adequate ventilation for a bathroom, en suite, shower room, wet room etc.
Will provide up to 75% heat recovery
(As air is extracted the unit will recover up to 75% of the heat and add it to clean fresh air, and pump it back into your house.)
6" 150mm Spigots on unit
Comes with 7 speeds controller is wired to 2 for trickle and boost
Eliminate mould and control condensation
Trickle/Boost Option included
Loft/void space mounting.
Condensation Drain fitted to bottom of Unit
Extract Rates needed when using continuous Ventilation (boost)
Kitchen - 13 l/s
Utility - 8 l/s
Bathroom - 8 l/s
Sanitary Accommodation - 6l/s
Please see our shop for more products!
Swiftair Passive Heat Recovery Unit
Please see below:
SAHRU150 + STUBE125 x 2
Controller x 1
Insulated ducting x 5 (50m)
Internal grilles x 8
T pieces x 7
External Grille x 2
SALUTAPE x 2
Connectors x 10
You will get 250 m3/h at free are through the heat recovery block once ducting is added recovery and air volume will reduce
(Wire an plug supplied plug straight in and turn on)
If you do not wish to use the plug please wire directly into terminal (controller will need to be wired to terminal)
STUBE125 - 400 m3/h
Up to 277 Pa STUBE125
65w STUBE125
NOISE LEVEL 40 dBA @ 3m - STUBE125
Swiftair Passive Heat Recovery Unit SAHRU150
The SAHRU150 provides balanced heat recovery for commercial and residential areas and is ideal for swimming pools, computer rooms, classrooms, shower rooms and changing areas etc.
A passive heat recovery unit does not come with any fans. They are installed separately in the duct. (please pictures)
Compatible with standard 150mm ducting
The unit provides control of condensation and odours.
Heat Recovery up to 70%
Easy to unscrew lid
Any size fan can be used please see graph in pictures
Part of the Silavent Green Line range, the HRX is a highly efficient MVHR appliance, designed to comply with 2010 Building Regulations and lower energy usage. Incorporating a number of userfriendly features that maximise system performance, the HRX is ideal for properties where installation space is restricted. Developed using the latest fan technology, the HRX offers an extremely low Specific Fan Power down to 0.58 W/(l/s) and reduces the build-up of condensation and mould.
As an added benefit to developers and house builders looking to lower the Dwelling Emission Rate (DER) required of any new property by Building Regulations, the HRX’s energy efficient fan also helps secure points towards a better SAP rating.
Exceeds Parts F and L of 2010 Building Regulations
SAP Appendix Q listed
Compact and extremely lightweight (11.5kg)
Supports kitchen and up to 7 wet rooms
Specific Fan Power down to 0.58W/(l/s)
Heat Recovery Efficiency up to 88%
For a Floor Area of 180m2
Energy efficient EC motors
Easy and quick to install, commission and maintain
Distinct moulded EPP casing improves thermal efficiency and maximises air flow
Wiring centre is mounted remotely, taking away the need to dismantle the unit during installation and preventing moisture from damaging the electrics
Design allows for left or right installation
Manufactured in the UK
Optional features:
Summer bypass that functions in both chambers and efficiently channels air around the heat exchanger
Glossy, white modern fascia
Frost protection sensor that reacts to temperatures below 5º
Bespoke condensate drainage kit, to remove the build-up of condensate
Controls for remote operation
**** Unlike other units in the market place, the HRX features a 100% summer bypass, which maintains air flow performance without compromising on heat exchange efficiency. This is an important feature to consider when specifying summer bypass units.
HRX-S – Standard HRX Unit
HRX-B - with summer bypass
HRX-FP - with frost protection
HRX-BFP - with summer bypass and frost protection
HRX-FS - with glossy white fascia
HRX-FB - with glossy white fascia and summer bypass
HRX-FFP - with glossy white fascia and frost protection
HRX-FBFP - with glossy fascia, summer bypass and frost protection
HRX-B-C - Ceiling Mounted
MANHR100W
with BOOST SWITCH - Made in the UK
3 year warranty
Features & Benefits
Installation in bathrooms/WC’s.
Meets building regulations for Bathrooms and Toilets for system1 intermittent
extract and for constant ventilation as per system 4 requirement
Eliminates mould.
Controls condensation.
70% Heat Recovery
Technical Details
Model No. Product type
HR100W Std Heat Recovery Unit
Boost Switch
Performance
HR100W
Extract Performance m3/h
High 77
Low 43
Intake Performance m3/h
High 69
Low 38
Watts
High 31
Low 12
Sound dB(A) at 3m
High 35
Low 20
Please see our shop for more products!
What you will receive:
10 x AG6 (Air Valves)
9 x T Piece 6"
80m of Insulated Ducting (8 boxes of 10m)
2 x FG6 Fixed Grille
2 x STUBE150 fans (460 m3/hr Free Air)
1 x Variable Speed Controllers
1 x SAHRU150 Heat Recovery Block
SAHRU150
The SAHRU150 provides balanced heat recovery for commercial
and residential areas and is ideal for swimming pools, computer rooms,
classrooms, shower rooms and changing areas etc..
A passive heat recovery unit does not come with any fans.
They are installed separately in the duct. (Please pictures)
Compatible with standard 150mm ducting
The unit provides control of condensation and odours.
Heat Recovery up to 70%
Easy to unscrew lid
Swiftair - STUBE Fan
STUBE fans are applied for supply and exhaust ventilation
systems of commercial, office and other premises. Compatible with Ø 100, 125,
150mm round air ducts.
Corrosion-resistant durable casing, these models are the
perfect solution for the installation in exhaust ventilation systems in humid
premises such as bathrooms, kitchens etc.
•The impeller with backward curved blades is powered by a
single-phase asynchronous AC motor with external rotor including the following
features:
•A dynamic balanced impeller with backward curved blades
balanced in two planes.
•Overheating protection with automatic restart.
•Maintenance-free ball-bearings used with motors and designed
for at least 40 000 hours operation.
•Motor protection rating IP X4
Installation to the wall or ceiling can be performed by means of mounting brackets (included in the delivery). The fan can be mounted at any angle. Electric connection and installation shall be performed in compliance with the manual and the wiring diagram on the terminal box.
Please see our shop for more products!
MANHR100RS - 3 Year Warranty - MADE IN THE UK (Manrose)
Ducting and Grilles can be supplied please contact us: 01564 703737
Features & Benefits
• Controls condensation and odours - saves energy.
• Eliminates mould growth.
• 70% Heat Recovery.
• Extremely quiet operation.
• E.g. extract from 1 wet room or kitchen, supply two rooms
Technical Details
Model No. Product type
You will receive:
MANHR100RS Std Heat Recovery Unit Bottom Access
Boost Switch
Performance
HR100R
Weight
Kg 5.6
Extract Performance m3/h
Boost 70 Trickle 41
Intake Performance m3/h
Boost 70
Trickle 30
Watts
Trickle 19
Sound dB(A) at 3m
Boost 30
Trickle 20
