Inline Fan Kits

XFLO100T Timer Light Inline Extractor Kit Back draught shutter LED Bathroom Fan
translation missing: en.products.product.regular_price £62.99
translation missing: en.products.product.regular_price £62.99
Swiftair 100mm – Mixed flow fan Timer Fan. (1 Year Warranty)
** Please select from the drop down menu above thank you **
SMF100T (Timer)
SL4WC - 3w LED light with Driver (Chrome and White bezel included)
ALU4100 5m - (5 meter of ducting)
BD-CON4100 - (Back Draught Shutter)
FG4 - (White 4" fixed Grille)
Clamps x 6
Quiet and powerful, high performance up to 220 m3/hr. They are less bulky than large in-line centrifugal fans and can be installed in loft spaces or service shafts. This range is specially designed for residential applications requiring remote extraction. It is also supplied with a mounting bracket for quick and easy installation on wooden joists and panels. The inlet/outlets are compatible with flexible and rigid pipe.

Application

SMF100T fans are suitable for removing damp moist air, odours and airborne pollutants from bathrooms, en-suites, shower rooms, utilities, kitchen and other internal living spaces without windows or natural ventilation.

Main Features

Quiet and powerful mixed flow fan
Run on Timer 
High performance up to 220 m3/hr (30 Watts)
Low Speed 160 m3/hr (24 watts)
Sound Level 35 dB (3m)
Remote mounting in lofts and cupboards
Low and High Switch on unit 
Thermally protected motor

If you buy two fans and use them on the same ducting you will get:

Two fans in series – double the pressure
Two fans in parallel – double the flow
Bathroom Shower Fan Kit Loft Ceiling Mounted Extractor Duct Vent Sofit Timer Std
£35.99
Standard and Timer Models Avialable please select
4" 100mm
In this kit you will get the following:
Internal White grille
3m PVC
Fixed White Grille
Cable Ties x 4
 
Timer Models Avialable please select above run on timer (Adjustable 1-15min)
Standard Model Comes with plug how ever this does not need to be used if not needed
 
XFLO fans are applied for supply and exhaust ventilation systems of commercial, office and other premises. 
Compatible with Ø 100mm round air ducts. 
Due to the corrosion-resistant durable plastic casing, these models are the perfect solution for the installation in exhaust ventilation systems in humid premises such as bathrooms, kitchens etc.
A dynamic balanced impeller
Overheating protection
Motor protection rating IP X4
Instalation to the wall or ceiling can be performed by means of mounting bracket (included). The fan can be mounted at any angle. Electric connection and installation shall be performed in compliance with the manual and the wiring diagram on the terminal box. 
 
Airflow
XFLO100 - 220 m3/h
 
Noise Level
NOISE LEVEL 35 dBA @ 3m - 100mm
4
£59.99

Item specifics

Condition:
New
Brand: Swiftair
Standard Model: Uk Plug Attached Type: Fan Kit
Timer Model: (No Plug) - Live, Neutral, Switched Live Needed MPN: SMF1
Light Grille: 12v (MR16 Bulb) - 3w LED Fan Type: Mixed Flow
Standard and Timer Models Available please select
 
4" 100mm
In this kit you will get the following:
SL4WC - Light Grille with Chrome and White bezel (3w LED) MR16 12v
3m PVC
Fixed White Grille
Cable Ties x 4
 
 
Timer Models Avialable please select above run on timer (Adjustable 1-15min)
Standard Model Comes with plug how ever this does not need to be used if not needed
 
XFLO fans are applied for supply and exhaust ventilation systems of commercial, office and other premises. 
Compatible with Ø 100mm round air ducts. 
Due to the corrosion-resistant durable plastic casing, these models are the perfect solution for the installation in exhaust ventilation systems in humid premises such as bathrooms, kitchens etc.
A dynamic balanced impeller
Overheating protection
Motor protection rating IP X4
Instalation to the wall or ceiling can be performed by means of mounting bracket (included). The fan can be mounted at any angle. Electric connection and installation shall be performed in compliance with the manual and the wiring diagram on the terminal box. 
 
Airflow
XFLO100 - 220 m3/h
 
Noise Level
NOISE LEVEL 35 dBA @ 3m - 100mm
Timer Inline Powerful Extractor Shower Bathroom Fan Light Kit 220 330 530m3/hr
£54.99
Timer Models
In this kit you will get the following: (if you select 4" you will get 4" grilles if you select 5" you will get 5" etc)
Internal grille (please select above)
5m Alu Duct
Back Draught Shutter
External Grille (please select above)
Clamps x 6
Please not the light grille only comes in 4" reducers will be supplied for 5" and 6" kit please use Duct tape to connect (tape not included)
Timer Models Avialable please select above run on timer (Adjustable 1-15min)
Standard Model Comes with plug how ever this does not need to be used if not needed
SMF fans are applied for supply and exhaust ventilation systems of commercial, office and other premises. Compatible with Ø 100, 125, 150mm round air ducts. 
Due to the corrosion-resistant durable plastic casing, these models are the perfect solution for the installation in exhaust ventilation systems in humid premises such as bathrooms, kitchens etc.
A dynamic balanced impeller
Overheating protection
Motor protection rating IP X4
Instalation to the wall or ceiling can be performed by means of mounting bracket (included). The fan can be mounted at any angle. Electric connection and installation shall be performed in compliance with the manual and the wiring diagram on the terminal box.
Airflow
SMF100 - 220 m3/h
SMF125 - 330 m3/h 
SMF150 - 530 m3/h
Noise Level
NOISE LEVEL 35 dBA @ 3m - 100
NOISE LEVEL 44 dBA @ 3m - 150
SL100TWC Bathroom Shower Extractor Fan with SELV Light Kit Chrome Grill - Std or Timer 4
translation missing: en.products.product.regular_price £31.99
translation missing: en.products.product.regular_price £31.99
SF100 Fan is designed for the safe ventilation of bathrooms, toilets and shower rooms, these 100mm (4") in-line extractor fans remove any risk of an electric shock in wet areas as the fan is mounted remotely, all SL100TWC fans come with timer if this is not needed please see below how to wire it out.
 
Powerful, yet extremely quiet in operation, the extract rate is 100m³/hr (27 ltr/sec).
 
Available with timer, the fan kits are supplied complete with fan unit, one length of PVC flexible ducting 3m, one internal Grille and one external white wall grille, fixing screws, plugs and straps to secure the duct and the grilles.
 
The internal light grille comes with a white and chrome bezel that is easily changeable by twisting off. LED drive is also include to power the 3w LED
 
Timer Fans need a Live, Neutral and Switched live
 
Power is provided by a single phase motor long, maintenance-free life.
 
Please Note For Standard Model: If timer is not needed please link between Switched live and live with a small piece of wire or remove PCB.
 
Installation
 
 
The shower fan is easy to install in the average loft/ceiling as after the hole has been cut in the ceiling of the shower/room, all other work is continued outside the living area.
 
Electrical
 
 
220-240V - AC 50Hz.
Single phase consuming 15w
 
Technical Specification
 
Maximum pressure: 20 p.a.
Fan speed: 2400 r.p.m.
Sound volume: 39.0 db(A).
Maximum operating temperature: 40°C
Swiftair XFLO 4
£49.99
Standard and Timer Models Avialable please select
In this kit you will get the following: (if you select 4" you will get 4" grilles if you select 5" you will get 5" etc)
Internal White grille
5m Alu Duct
Back Draught Shutter
Fixed White Grille
Clamps x 4
Timer Models Available please select above run on timer (Adjustable 1-15min)
Standard Model Comes with plug how ever this does not need to be used if not needed
SMF fans are applied for supply and exhaust ventilation systems of commercial, office and other premises. Compatible with Ø 100, 125, 150mm round air ducts. 
Due to the corrosion-resistant durable plastic casing, these models are the perfect solution for the installation in exhaust ventilation systems in humid premises such as bathrooms, kitchens etc.
A dynamic balanced impeller
Overheating protection
Motor protection rating IP X4
Instalation to the wall or ceiling can be performed by means of mounting bracket (included). The fan can be mounted at any angle. Electric connection and installation shall be performed in compliance with the manual and the wiring diagram on the terminal box. 
Airflow
SMF100 - 220 m3/h
SMF125 - 330 m3/h
SMF150 - 530 m3/h
Noise Level
NOISE LEVEL 35 dBA @ 3m - 100mm
NOISE LEVEL 37 dBA @ 3m - 125mm
NOISE LEVEL 44 dBA @ 3m - 150mm
Silavent/Domus 4
£18.99
Silavent/Domus 4" Inline Extractor Fan Timer Std Kit Ventilation Bathroom Shower

Silavent/Domus 4" Inline Extractor Fan Timer Std Kit Ventilation Bathroom Shower

Silavent DVF100 Standard 100mm In-Line Axial Fan Kit

 

The DVF100/DVF80 standard or Timer bathroom extract fan kit is designed to be both discreet and efficient and to extract air direct from the shower cubicle.

 

Included in Kit

 

Axial in-line fan (Timer or Standard Select above)

Circular Internal Grille - White

3m flexible ducting

External Grille - White


4
£13.99
In this kit you will get 
Fan - Please select
Ducting PVC 1 metre
Internal Grille - Please select colour
External Grille - White
Alu tape - 1 metre
Exhaust side will fit into ducting
exhaust or Supply ventilation of bathroom, showers, kitchens and other.
Designed for PVC duct systems or flexible ducts.
The case and the impeller are made of high-quality durable ABS plastic,this is not affected by UV
Slider bearings motor equipped overheating protection.
Different inlet & exhaust flange diameter
Inlet side will fit on to Carbon filter or Grille Spigot
Exhaust side will fit into ducting
Airflow
4" - 107m3/hr
5" - 190m3/hr
6" - 270m3/hr
Sound Level dBA
4" - 35 dBA
5" - 36 dBA
6" - 38 dBA
Wattage
4" - 14w
5" - 18w
6" - 22w
TIP: 
The less ducting you use the more suction (airflow) you will get we recommend using the shortest run possible 
Recommended Length 2m of Ducting MAX
MF100S MF100T Mixedflow Back Draught Bathroom inline Fan Light Kit 4
£94.99
MF100S MF100T Mixedflow Back Draught Bathroom inline Fan Light Kit 4" 100mm

MF100S MF100T Mixedflow Back Draught Bathroom inline Fan Light Kit 4" 100mm

Standard Model On/Off (2 Speed)

Timer 1-20min (2 Speed)

****Please select type required from drop down menu****
Internal White/Chrome Light grille 3w LED
5m Alu Duct
Back Draught Shutter
Fixed White Grille
These powerful in-duct mounted mixed flow fans have been designed to produce higher working pressures for applications that require high air flows, with low relative noise.

Mixflo fans can be mounted in a variety of applications as shown and are suitable for use with either rigid or flexible ducting 

• High quality ball bearing, long life motors, continuously rate and warranted for a minimum of 30,000 hours or 3 years. 
• High air flows are achieved through flexible duct 
• Compact overall dimensions 
• 2 speed fan settings for 100mm/4 
• Double Insulation – no earth required 
• Fully Building Code compliant 
• Fully BEAB approved rated to IPX4.
• Easy installation and maintenance with the fan assembly easily removed from rigid ducting installations using the specially designed construction

Technical specifications:

- Speed (RPM): High 2400, Low 1700
- Wattage: High 25, Low 20
- Maximum Airflow (m³/hr) : High 245, Low 180
- Maximum Airflow (LPS): High 68, Low 50
- Maximum Pressure (PA): High 200, Low 120
- Noise dB(A): High 24, Low 20

- Max Operating Temp ºC: 40


Manrose MF Timer Std Mixedflow Back Draught Bathroom inline Fan Kit 4
£88.99
MF100S MF100T Timer Std Mixedflow Back Draught Bathroom inline Fan Kit 4" 100mm

MF100S MF100T Timer Std Mixedflow Back Draught Bathroom inline Fan Kit 4" 100mm

Standard Model On/Off (2 Speed)

Timer 1-20min (2 Speed)

****Please select Size required from drop down menu****
Internal White grille
5m Alu Duct
Back Draught Shutter
Fixed White Grille
Clamps x 4 

These powerful in-duct mounted mixed flow fans have been designed to produce higher working pressures for applications that require high air flows, with low relative noise.

Mixflo fans can be mounted in a variety of applications as shown and are suitable for use with either rigid or flexible ducting

• High quality ball bearing, long life motors, continuously rate and warranted for a minimum of 30,000 hours or 3 years.
• High air flows are achieved through flexible duct
• Compact overall dimensions
• 2 speed fan settings for 100mm/4
• Double Insulation – no earth required
• Fully Building Code compliant 
• Fully BEAB approved rated to IPX4.

• Easy installation and maintenance with the fan assembly easily removed from rigid ducting installations using the specially designed construction

Technical specifications:

- Speed (RPM): High 2400, Low 1700
- Wattage: High 25, Low 20
- Maximum Airflow (m³/hr) : High 245, Low 180
- Maximum Airflow (LPS): High 68, Low 50
- Maximum Pressure (PA): High 200, Low 120
- Noise dB(A): High 24, Low 20
- Max Operating Temp ºC: 40

 


4
£24.99
In this kit you will get 
Fan - Please select
Ducting PVC 1 metre
SL4WC - Light grille Chrome and White bezel + Transformer 
External Grille - White
Alu tape - 1 metre
Exhaust side will fit into ducting
exhaust or Supply ventilation of bathroom, showers, kitchens and other.
Designed for PVC duct systems or flexible ducts.
The case and the impeller are made of high-quality durable ABS plastic,this is not affected by UV
Slider bearings motor equipped overheating protection.
Different inlet & exhaust flange diameter
Inlet side will fit on to Carbon filter or Grille Spigot
Exhaust side will fit into ducting
Airflow
4" - 107m3/hr
5" - 190m3/hr
6" - 270m3/hr
Sound Level dBA
4" - 35 dBA
5" - 36 dBA
6" - 38 dBA
Wattage
4" - 14w
5" - 18w
6" - 22w
TIP: 
The less ducting you use the more suction (airflow) you will get we recommend using the shortest run possible 
Recommended Length 2m of Ducting MAX
Bathroom Shower Fan Kit Rigid Duct Ceiling Mounted Extractor Duct Timer Std 4
£54.99
Brand: Swiftair
Timer Model: (No Plug) - Live, Neutral, Switched Live Needed Type: Inline Fan Kit
Ducting Type: Solid / Rigid MPN: SMF1
Bends etc: See description Fan Type: Mixed Flow
Size: 4" 100mm Standard Model: Uk Plug Attached
Tape or Silicon included: No - this will be needed to fit the pipe together
Standard and Timer Models Avialable please select
4" 100mm
In this kit you will get the following:
 
Internal White grille or White Grille (Please Select)
1m Rigid Duct x 3 (3m)
Connectors x 2
90 Degree Bends x 2
45 Degree bends x 2
Fixed White Grille
 
 
Timer Models Avialable please select above run on timer (Adjustable 1-15min)
Standard Model Comes with plug how ever this does not need to be used if not needed
 
XFLO fans are applied for supply and exhaust ventilation systems of commercial, office and other premises. 
Compatible with Ø 100mm round air ducts. 
Due to the corrosion-resistant durable plastic casing, these models are the perfect solution for the installation in exhaust ventilation systems in humid premises such as bathrooms, kitchens etc.
A dynamic balanced impeller
Overheating protection
Motor protection rating IP X4
Instalation to the wall or ceiling can be performed by means of mounting bracket (included). The fan can be mounted at any angle. Electric connection and installation shall be performed in compliance with the manual and the wiring diagram on the terminal box. 
 
Airflow
XFLO100 - 220 m3/h
 
Noise Level
NOISE LEVEL 35 dBA @ 3m - 100mm
VSF100T, VSF100S, VSL100TC Light, Timer, Standard Extractor Fan Shower Bathroom
£18.99
Made by Manrose / Intervent label on Box
VSF100T (Timer) - Does NOT come with Light grille 
VSF100S (Standard) - Does NOT come with Light grille 
VSL100TC (Timer+Light Grille) - Supplied with Light grille 
Please selct which fan kit you need above 
3 Year Warranty
- This Fan is suitable for mounting above a ceiling or use where longer duct runs are needed 
- The fan is mounted in the duct 
Manrose/ Intervent VSF100, VSL100 In-Line Tube Shower Fan Kit with PVC Ducting & Grille 100mm 240V (VSL100 Includes Light and Transformer)
(VSL100TC comes with White and Chrome Cover for internal grille)
Designed for the safe ventilation of bathrooms, toilets and shower rooms, these 100mm (4") in-line extractor fans remove any risk of an electric shock in wet areas as the fan is mounted remotely. 
Powerful, yet extremely quiet in operation, the extract rate is 85m³/hr (23 ltr/sec). 
Available with or without a timer, the fan kits are supplied complete with fan unit, one length of PVC flexible ducting, one internal (white) and one external wall grille, fixing screws, plugs and straps to secure the duct to the grilles. 
Power is provided by a single phase induction motor with pre-oiled bearings for a long, maintenance-free life.
The units are all manufactured using high impact ABS thermoplastics for strength and durability, aesthetics and easy cleaning.
Designed to comply with the 2006 Building Regulations on Ventilation (F1).
Installation
The shower fan is easy to install in the average loft/ceiling recess as after the hole has been cut in the ceiling of the shower/room, all other work is continued outside the living area.
Electrical
220-240V - AC 50Hz.
Single phase consuming 14 watts.
Technical Specification
• Maximum pressure: 20 p.a.
• Fan speed: 2400 r.p.m.
• Sound volume: 41.0 db(A).
• Maximum operating temperature: 40°C
VSF100 Extractor Fan In-Line Tube Shower Fan Kit 4
£18.99
Made by Manrose / Intervent label on Box
VSF100T (Timer)
VSF100S (Standard)
Please selct which fan kit you need above 
3 Year Warranty
- This Fan is suitable for mounting above a ceiling or use where longer duct runs are needed 
- The fan is mounted in the duct 
Manrose/ Intervent VSF100  In-Line Tube Shower Fan Kit with PVC Ducting & Grille 100mm 240V
Designed for the safe ventilation of bathrooms, toilets and shower rooms, these 100mm (4") in-line extractor fans remove any risk of an electric shock in wet areas as the fan is mounted remotely. 
Powerful, yet extremely quiet in operation, the extract rate is 85m³/hr (23 ltr/sec). 
Available with or without a timer, the fan kits are supplied complete with fan unit, one length of PVC flexible ducting, one internal (white) and one external wall grille, fixing screws, plugs and straps to secure the duct to the grilles. 
Power is provided by a single phase induction motor with pre-oiled bearings for a long, maintenance-free life.
The units are all manufactured using high impact ABS thermoplastics for strength and durability, aesthetics and easy cleaning.
Designed to comply with the 2006 Building Regulations on Ventilation (F1).
Installation
The shower fan is easy to install in the average loft/ceiling recess as after the hole has been cut in the ceiling of the shower/room, all other work is continued outside the living area.
Electrical
220-240V - AC 50Hz.
Single phase consuming 14 watts.
Technical Specification
• Maximum pressure: 20 p.a.
• Fan speed: 2400 r.p.m.
• Sound volume: 41.0 db(A).
• Maximum operating temperature: 40°C
SMF 4 5 6
£64.99
SMF 4 5 6" MixedFlow Inline Fan Complete Kit Back Draught Shutter Chrome Grille

SMF 4 5 6" MixedFlow Inline Fan Complete Kit Back Draught Shutter Chrome Grille

Standard and Timer Models Avialable please select

In this kit you will get the following: (if you select 4" you will get 4" grilles if you select 5" you will get 5" etc)

Internal Chrome grille

5m Alu Duct

Back Draught Shutter

Fixed White Grille

Clamps x 4

Timer Models Avialable please select above run on timer (Adjustable 1-15min)
Standard Model Comes with plug how ever this does not need to be used if not needed

SMF fans are applied for supply and exhaust ventilation systems of commercial, office and other premises. Compatible with Ø 100, 125, 150mm round air ducts. 

Due to the corrosion-resistant durable plastic casing, these models are the perfect solution for the installation in exhaust ventilation systems in humid premises such as bathrooms, kitchens etc.

A dynamic balanced impeller
Overheating protection
Motor protection rating IP X4

Instalation to the wall or ceiling can be performed by means of mounting bracket (included). The fan can be mounted at any angle. Electric connection and installation shall be performed in compliance with the manual and the wiring diagram on the terminal box. 

Airflow

SMF100 - 220 m3/h
SMF125 - 330 m3/h
SMF150 - 530 m3/h

Noise Level

NOISE LEVEL 35 dBA @ 3m - 100
NOISE LEVEL 37 dBA @ 3m - 125
NOISE LEVEL 44 dBA @ 3m - 150

 


Shower Fan Kit - 4
translation missing: en.products.product.regular_price £26.99
translation missing: en.products.product.regular_price £26.99

MANROSE - VSF100T (Timer Model) with CHROME GRILLE! 

3 Year Warranty

- This Fan is suitable for mounting above a ceiling or can be used where longer duct runs are needed 

- The fan is mounted in the duct 

Manrose/ Intervent VSF100T (Timer Model) In-Line Tube Shower Fan Kit with PVC Ducting & Grille 100mm 240V

Designed for the safe ventilation of bathrooms, toilets and shower rooms, these 100mm (4") in-line extractor fans remove any risk of an electric shock in wet areas as the fan is mounted remotely.

Powerful, yet extremely quiet in operation, the extract rate is 85m³/hr (23 ltr/sec).

Available with or without a timer, the fan kits are supplied complete with fan unit, one length of PVC flexible ducting, one internal (chrome) and one external wall grille, fixing screws, plugs and straps to secure the duct to the grilles.

Power is provided by a single phase induction motor with pre-oiled bearings for a long, maintenance-free life.

The units are all manufactured using high impact ABS thermoplastics for strength and durability, aesthetics and easy cleaning.

Designed to comply with the 2006 Building Regulations on Ventilation (F1).

Installation

The shower fan is easy to install in the average loft/ceiling recess as after the hole has been cut in the ceiling of the shower/room, all other work is continued outside the living area.

Electrical

220-240V - AC 50Hz.
Single phase consuming 14 watts.

Technical Specification

• Maximum pressure: 20 p.a.
• Fan speed: 2400 r.p.m.
• Sound volume: 41.0 db(A).
• Maximum operating temperature: 40°C


Shower Fan Kit - 4
translation missing: en.products.product.regular_price £24.99
translation missing: en.products.product.regular_price £24.99

MANROSE - VSF100S (Standard Model) with CHROME GRILLE! 

3 Year Warranty

- This Fan is suitable for mounting above a ceiling or can be used where longer duct runs are needed 

- The fan is mounted in the duct 

Manrose/ Intervent VSF100S (Standard Model) In-Line Tube Shower Fan Kit with PVC Ducting & Grille 100mm 240V

Designed for the safe ventilation of bathrooms, toilets and shower rooms, these 100mm (4") in-line extractor fans remove any risk of an electric shock in wet areas as the fan is mounted remotely.

Powerful, yet extremely quiet in operation, the extract rate is 85m³/hr (23 ltr/sec).

Available with or without a timer, the fan kits are supplied complete with fan unit, one length of PVC flexible ducting, one internal (white) and one external wall grille, fixing screws, plugs and straps to secure the duct to the grilles.

Power is provided by a single phase induction motor with pre-oiled bearings for a long, maintenance-free life.

The units are all manufactured using high impact ABS thermoplastics for strength and durability, aesthetics and easy cleaning.

Designed to comply with the 2006 Building Regulations on Ventilation (F1).

Installation

The shower fan is easy to install in the average loft/ceiling recess as after the hole has been cut in the ceiling of the shower/room, all other work is continued outside the living area.

Electrical

220-240V - AC 50Hz.
Single phase consuming 14 watts.

Technical Specification

• Maximum pressure: 20 p.a.
• Fan speed: 2400 r.p.m.
• Sound volume: 41.0 db(A).

• Maximum operating temperature: 40°C


Polypipe Silavent Domus Inline Bathroom Extractor Fan Light Kit LED
£49.99
Polypipe Silavent Domus Inline Bathroom Extractor Fan Light Kit LED

Polypipe Silavent Domus Inline Bathroom Extractor Fan Light Kit LED

Silavent Spotvent 100mm Inline Fan and LV Light Kit

 

The Silavent Spotvent Inline Fan and Light Kit is a 100mm in-line axial fan with light, supplied complete with a duct kit and covered by a full three year warranty.

 

Designed to provide stylish and discreet ventilation and light within splash zones in toilets, bathrooms and shower areas the Spotvent SPV801 and SPV802 offers the complete solution

 

You will Receive

 

Fan - Stand or Timer please select

 

LED light grille x 1

 

PVC 3 Metre ducting x 1

 

External Grille White x 1

 

Features and Benefits

 

High performance level - up to 70cu.mts/hr

IPX4 rated

Easy to install

Kit includes: 100mm in line fan,

3 metres of flexiduct,

Spotvent lamp holder,

External grille,

LED lamp,

Transformer

IPX4 splash guard,

Both white and chrome bezels

 

Description 230V

Maximum Extract Volume (cu.mts/hr) 83

Maximum Extract Volume (lts/sec) 23

Maximum Pressure (Pa) 25

Supply Frequency (Hz) 50

Maximum Power (W) (fan Only) 13.6

Maximum Sound (dB(A) at 3mts 39

IP Rating X4

Maximum Temperature (degrees C) 40

Warranty 2 years


Click to edit text
MF100, MF125, MF150 Timer Standard Back Draught Bathroom Fan Kit 4
£89.99
MF100, MF125, MF150 Timer Standard Back Draught Bathroom Fan Kit 4" 5" 6"

MF100, MF125, MF150 Timer Standard Back Draught Bathroom Fan Kit 4" 5" 6"

Standard Model On/Off (2 Speed)

Timer 1-20min (2 Speed)

****Please select Size required from drop down menu****

Internal Chrome grille
5m Alu Duct
Back Draught Shutter
Fixed White Grille
Clamps x 4 

These powerful in-duct mounted mixed flow fans have been designed to produce higher working pressures for applications that require high air flows, with low relative noise.

Mixflo fans can be mounted in a variety of applications as shown and are suitable for use with either rigid or flexible ducting

• High quality ball bearing, long life motors, continuously rate and warranted for a minimum of 30,000 hours or 3 years.
• High air flows are achieved through flexible duct
• Compact overall dimensions
• 2 speed fan settings for 100mm/4
• Double Insulation – no earth required
• Fully Building Code compliant 
• Fully BEAB approved rated to IPX4.
• Easy installation and maintenance with the fan assembly easily removed from rigid ducting installations using the specially designed construction

Technical specifications:

- Speed (RPM): High 2400, Low 1700
- Wattage: High 25, Low 20
- Maximum Airflow (m³/hr) : High 245, Low 180
- Maximum Airflow (LPS): High 68, Low 50
- Maximum Pressure (PA): High 200, Low 120
- Noise dB(A): High 24, Low 20
- Max Operating Temp ºC: 40


MANROSE VSL100TC BATHROOM EXTRACTOR SHOWER FAN LIGHT KIT TIMER CHROME
translation missing: en.products.product.regular_price £39.99
translation missing: en.products.product.regular_price £39.99

Made by Manrose / Intervent Label on Box

VSL100TC comes with White and Chrome for internal grille

The Showerlite can be used within the splash area of the shower bath and is powered by a S.E.L.V. remote safety isolating transformer.

Each Showerlite is packed with Fan, Showerlite unit White or Chrome Internal Grille 12V MR16 25w Halogen light, transformer, one length of 3m PVC flexible ducting external wall grille, fixings screws, plugs and straps.

100mm Axial Fan with built in timer for an adjustable overrun of 1-20 minutes.

Designed for the safe ventilation of bathrooms, toilets and shower rooms, these 100mm (4") in-line extractor fans remove any risk of an electric shock in wet areas as the fan is mounted remotely.

Powerful, yet extremely quiet in operation, the extract rate is 85m³/hr (23 ltr/sec).

Available with or without a timer, the fan kits are supplied complete with fan unit, one length of PVC flexible ducting, one internal (white) and one external wall grille, fixing screws, plugs and straps to secure the duct to the grilles.

Power is provided by a single phase induction motor with pre-oiled bearings for a long, maintenance-free life.

The units are all manufactured using high impact ABS thermoplastics for strength and durability, aesthetics and easy cleaning.

Designed to comply with the 2006 Building Regulations on Ventilation (F1).

Installation

The shower fan is easy to install in the average loft/ceiling recess as after the hole has been cut in the ceiling of the shower/room, all other work is continued outside the living area.

Electrical

220-240V - AC 50Hz.

Single phase consuming 14 watts.

Technical Specification

· Maximum pressure: 20 p.a.

· Fan speed: 2400 r.p.m.

· Sound volume: 41.0 db(A).

· Maximum operating temperature: 40°C

Dimensions in (mm)


Manrose MF Timer Standard Back Draught Bathroom Fan Brush Steel Grille Kit
£98.48
MF100, MF125, MF150 Timer Standard Back Draught Bathroom Fan Brush Steel Grille

MF100, MF125, MF150 Timer Standard Back Draught Bathroom Fan Brush Steel Grille

Standard Model On/Off (2 Speed)

Timer 1-20min (2 Speed)

****Please select Size/Type required from drop down menu****

Internal Brushed Steel grille
5m Alu Duct
Back Draught Shutter
Fixed White Grille
SALUTAPE 

These powerful in-duct mounted mixed flow fans have been designed to produce higher working pressures for applications that require high air flows, with low relative noise.

Mixflo fans can be mounted in a variety of applications as shown and are suitable for use with either rigid or flexible ducting

• High quality ball bearing, long life motors, continuously rate and warranted for a minimum of 30,000 hours or 3 years.
• High air flows are achieved through flexible duct
• Compact overall dimensions
• 2 speed fan settings for 100mm/4
• Double Insulation – no earth required
• Fully Building Code compliant 
• Fully BEAB approved rated to IPX4.
• Easy installation and maintenance with the fan assembly easily removed from rigid ducting installations using the specially designed construction

Technical specifications:

- Speed (RPM): High 2400, Low 1700
- Wattage: High 25, Low 20
- Maximum Airflow (m³/hr) : High 245, Low 180
- Maximum Airflow (LPS): High 68, Low 50
- Maximum Pressure (PA): High 200, Low 120
- Noise dB(A): High 24, Low 20

- Max Operating Temp ºC: 40

 


Manrose LEDSLKTC Shower Bathroom Extractor Fan LED Light with Timer 100mm 4
translation missing: en.products.product.regular_price £83.99
translation missing: en.products.product.regular_price £83.99

Manrose LEDSLKTC LED Showerlite Bathroom Extractor Fan and Shower Light 100mm

The Manrose LEDSLKTC LED Showerlite is a 100mm, Part L compliant showerlight fan that now comes with an optional 3W LED lamp. The new LED lamp consumes 90% less power than the standard dichroic lamp.

The manrose LED Showerlite is a distinctive showerlight which is incorporated into a circular grille, suitable for showers and bathrooms. 

The LED Showerlite can be used within the splash area of the shower or bath and is powered by a S.E.L.V. LED Driver. Part F and L compliant with a specific fan power down to 0.43 w/l/s.

Available in two colours; white and chrome, the manrose LED Showerlite will enhance any shower or bathroom providing a rich warm glow of soft light.

The LED Showerlite is available in boxed carton packaging. Each pack is supplied complete with fan, Showerlite unit, LED Driver, one length of PVC flexible ducting, external wall grille, fixing screws, plugs and straps.

100mm Showerlite fan kit, complete with turning vane, backdraught shutter and a adjustable over run timer (1-20mins) with chrome/white fitting showerlite and 12 volt LED Driver. Also comes with 1.5m PVC ducting, butterfly clips, cables ties, screw plugs as well as an external grille.

Installation:

Designed to be ceiling mounted through 102mm (4") diameter flexible ducting or rigid pipes

Electrical:

12 volt DC 3W GU5.3 sealed lamp.
Powered by an LED Driver.

Input, AC. Output - 12 volt DC. 1A


Manrose Complete Bathroom Shower Inline Light LED Extractor Centrifugal Fan Kit
translation missing: en.products.product.regular_price £64.99
translation missing: en.products.product.regular_price £64.99

Please see our shop for more products!

LED Showerlite Kit c/w 3w LED Lamp

SCF200 Series In-line Centrifugal Timer Kit
Now comes with a 3w LED lamp and uses 90% less power than a standard dichroic lamp.
The LED Showerlite can be used within the splash area of the shower or bath and is powered by a SELV LED Driver
Comes complete with both chrome and white interchangeable bezels
Boasts a high performance of 110m³/hr, 31 litres per second

Features and Benefits

Providing solutions for a wide range of domestic, commercial and industrial applications, the CFD200TN in-line fan has been designed for use with suspended ceilings/voids.

Powerful, yet quiet and unobtrusive, the CFD200 units have extract rates of 110m3/hr (31 litres per second).

The LEDSLCFDTCN is suitable for a wide range of applications including bathrooms, toilets, shower rooms and utility rooms.

The CFD200TN In-line fan is fitted with backward curved centrifugal impellers for a large airflow against the high pressures caused by longer lengths of ducting and resistance by grilles.

The CFD200TN units are manufactured using high impact ABS thermoplastics for strength and durability, aesthetics and easy cleaning.

A spring operated, non-return flap is built into the discharge spigot to prevent backdraughts.

Power to the CFD200TN In-line fan is provided by a single phase induction motor with pre-oiled bearings for a long, maintenance-free life.

The LEDSLCFDTCN In-line centrifugal Showerlite fan kits comprises of the Showerlite Fitting/Chassis, warm LED bulb and LED driver transformer. The 100mm centrifugal in-line fan unit, 6 metres of PVC ducting, wall grilles and wall/ceiling fixings.


Manrose Complete Bathroom Shower Inline Light Extractor Fan Centrifugal Fan Kit
translation missing: en.products.product.regular_price £154.99
translation missing: en.products.product.regular_price £154.99

Please see our shop for more products!

Pro Showerlite Professional Showerline Fan Kit - PROCFSLKC (AT A GREAT PRICE!)

The complete Professional Showerlite fan kit gives you so much more. It includes everything you require to provide an effective and powerful way, to totally extend the ventilation in your bathroom or any other area in your house.

For more information please see pdf download:

http://www.manrose.com/specifications/proshowerlitefankit.pdf

The Professional Showerlite kit is supplied complete with:

1. In-line MF100S duct fan 240m3/hr
2. 1 x 120mm/5" Showerlite unit with chrome fitting & reducer to 100mm/4"
3. 1 x Circular Internal White Grille
4. 10 metres of 100mm/4" PVC Flexible Ducting
5. 1 x Egg Crate External Wall Grille
6. 1 x PVC T-Piece Connector
7. 1 x Low Volt Transformer

The first in-shower ventilation kit incorporates seven different pieces of ventilation equipment within one kit. The kit includes:

An attractive powerful 120mm/5" Showerlite with a built in extended reducer, to reduce to 100mm/4". The Showerlite fan has an attractive chrome finish and is a sealed unit for total IP waterproof protection. It provides a rich warm glow of soft light to enhance any bathroom.

One additional inlet, this is a circular internal white grille, which has a unique design, and will fit unobtrusively into any room.

10 metres of 100mm/4" flexible PVC ducting. This long length enables you to adapt the installation in any size room.

An external wall grille; the in-line fan extracts through the egg crate wall grille, which fits into the external soffit. (See installation for install guide).

A PVC T-Piece connector, which connects the PVC ducting to the in-line fan, internal grille and Shower light.

A safety extra low voltage (SELV) transformer, to power the 12 volt shower light. The complete kit for your total ventilation



Manrose 4
£38.99
Manrose 4"100mm SF100S SF100T Inline Shower Extractor Fan with Ducting & Grilles

Manrose 4"100mm SF100S SF100T Inline Shower Extractor Fan with Ducting & Grilles

Designed for the safe ventilation of bathrooms, toilets and shower rooms, the SF/ID 100 (100mm 4") range of inline extractor fans remove any risk of an electric shock in wet areas as the fan is mounted remotely.

Powerful, yet extremely quiet in operation, the extract rate of the SF/ID100 is 85m3 /hr 23 litres per second.

 Available with or without a timer, the SF100 fan kits are supplied complete with a fan unit, one length of PVC flexible ducting, one internal (white) and one external wall grille, fixing screws, plugs and straps to secure the duct to the grilles.

The ID100 series comprises a fan unit only and is suitable for boosting another fan where a long run of ducting is used.

The units are all manufactured using high impact ABS thermoplastics for strength and durability, aesthetics and easy cleaning.

Power is provided by a single-phase induction motor with pre-oiled bearings for a long, maintenance-free life.

Designed to comply with the Building Regulations on Ventilation (F1).


Manrose 4
£57.99
Manrose 4"100mm 6"150mm SLKTC SL-150TC Showerlite Kit Extrtactor Fan Shower

Manrose 4"100mm 6"150mm SLKTC SL-150TC Showerlite Kit Extrtactor Fan Shower

The Manrose Showerlite is a distinctive Showerlite which is incorporated into a circular diffuser, suitable for showers and bathrooms. Now available in 100mm (4") and 150mm (6") versions.

The Showerlite can be used within the splash area of the shower or bath and is powered by a SELV remote safety isolating transformer.

The Showerlite is suitable for any 100mm (4"), 150mm (6") in-line system such as the Manrose SF/ID range of in-line axial fans or the CFD range of in-line centrifugal fans.

Available in chrome, the Manrose Showerlite will enhance any shower or bathroom providing a rich warm glow of soft light.

Each pack is supplied complete with fan, Showerlite unit, transformer, one length of PVC flexible ducting, external wall grille, fixing screws, plugs and straps.


Inline Extractor Fan Bathroom System Light Grilles x 2 Shower Back Draught 4
translation missing: en.products.product.regular_price £99.99
translation missing: en.products.product.regular_price £99.99

Timer Model 1-15min

This kit comes with the following:

SMF100T x 1

5m Alu Ducting x 1

T Piece x 1

Back Draught Shutter x 1

Light grille 3w (white and chrome fixing) x 2

External Fixed White Grille x 1

Clamps x 8

Swiftair 100mm – Mixed flow fan.

Quiet and powerful, high performance up to 220 m3/hr. They are less bulky than large in-line centrifugal fans and can be installed in loft spaces or service shafts. This range is specially designed for residential applications requiring remote extraction. It is also supplied with a mounting bracket for quick and easy installation on wooden joists and panels. The inlet/outlets are compatible with flexible and rigid pipe.

Application

SMF100T fans are suitable for removing damp moist air, odours and airborne pollutants from bathrooms, en-suites, shower rooms, utilities, kitchen and other internal living spaces without windows or natural ventilation.

Main Features

Quiet and powerful mixed flow fan

Run on Timer

High performance up to 220 m3/hr

Remote mounting in lofts and cupboards

Double-up – Two fans in series – double the pressure

Two fans in parallel – double the flow

Thermally protected motor

These fans do not come with a plug or wire


Inline Extractor Fan Bathroom System Chrome & Light Grilles Shower Back Draught
translation missing: en.products.product.regular_price £84.99
translation missing: en.products.product.regular_price £84.99

Timer Model 1-15min

This kit comes with the following:

SMF100T x 1

5m Alu Ducting x 1

T Piece x 1

Back Draught Shutter x 1

Light grille 3w (white and chrome fixing) x 1

Chrome Grille x 1

External Fixed White Grille x 1

Clamps x 8

Swiftair 100mm – Mixed flow fan.

Quiet and powerful, high performance up to 220 m3/hr. They are less bulky than large in-line centrifugal fans and can be installed in loft spaces or service shafts. This range is specially designed for residential applications requiring remote extraction. It is also supplied with a mounting bracket for quick and easy installation on wooden joists and panels. The inlet/outlets are compatible with flexible and rigid pipe.

Application

SMF100T fans are suitable for removing damp moist air, odours and airborne pollutants from bathrooms, en-suites, shower rooms, utilities, kitchen and other internal living spaces without windows or natural ventilation.

Main Features

Quiet and powerful mixed flow fan

Run on Timer

High performance up to 220 m3/hr

Remote mounting in lofts and cupboards

Double-up – Two fans in series – double the pressure

Two fans in parallel – double the flow

Thermally protected motor

These fans do not come with a plug or wire


4
translation missing: en.products.product.regular_price £21.99
translation missing: en.products.product.regular_price £21.99

Swiftair - SF100T 1 - Year Warranty

 

Fan

SF100T - Timer 1-15min

Internal Grille

Circular Chrome Grille

Ducting

3m - 4" 100mm PVC Ducting

Outside Grille

Fixed Grille White

 

About the Fan

Input Watts - 15

Airflow - 100m3/h

39 Dba

PA - 20 (MAX)

 

Please select above if you would like just the fan or any of the additional grilles, Ducting

Ceiling mounted fan, fan to be mounted within duct 

TIP: 

Recommended Length of Ducting - 1.5m 

Designed for the safe ventilation of bathrooms, toilets and shower rooms, the SF100 (100mm 4") range of in-line extractor fans remove any risk of an electric shock in wet areas as the fan is mounted remotely. 

Powerful, yet extremely quiet in operation, the extract rate of the SF100 is 100m3/hr 

The units are all manufactured using high impact ABS thermoplastics for strength and durability, aesthetics and easy cleaning. 

Power is provided by a single phase induction motor with pre-oiled bearings for a long, maintenance-free life.

4
translation missing: en.products.product.regular_price £18.99
translation missing: en.products.product.regular_price £18.99
Fan
 
 
SF100T - Timer 1-15min
 
Internal Grille
 
 
Circular White Grille
 
Ducting
 
 
3m - 4" 100mm PVC Ducting
 
Outside Grille
 
 
Fixed Grille Brown
 
About the Fan
 
 
Input Watts - 15
 
Airflow - 100m3/h
 
39 Dba
 
PA - 20 (MAX)
 
Please select above if you would like just the fan or any of the additional grilles, Ducting
 
Ceiling mounted fan, fan to be mounted within duct
 
TIP:
 
 
Recommended Length of Ducting - 1.5m
 
Designed for the safe ventilation of bathrooms, toilets and shower rooms, the SF100 (100mm 4") range of in-line extractor fans remove any risk of an electric shock in wet areas as the fan is mounted remotely.
 
Powerful, yet extremely quiet in operation, the extract rate of the SF100 is 100m3/hr
 
The units are all manufactured using high impact ABS thermoplastics for strength and durability, aesthetics and easy cleaning.
 
Power is provided by a single phase induction motor with pre-oiled bearings for a long, maintenance-free life.
4
£16.99
SF100 - 100 m3/h (with or without Timer)
SF125 - On/Off - 150 m3/h (with or without Timer)
SF150 - On/Off - 210 m3/h (with or without Timer)
Fans do not come with wire and will need to be wired
Included in the price:
Fan - Inline fan standard or timer
Internal Grille - Circular White Grille
Ducting - 1m - PVC Ducting
Outside Grille - Fixed Grille White
Clamps- 4 x Cable ties
Ceiling mounted fan, fan to be mounted within duct
 
TIP:
 
 
The less ducting you use the more suction (airflow) you will get if using the full 5 meter this will only give a small suction (airflow) we recommend using the shortest run possible
 
- Recommended Length 3m of Ducting MAX
 
- Designed for the safe ventilation of bathrooms, toilets and shower rooms, the SF range of in-line extractor fans remove any risk of an electric shock in wet areas as the fan is mounted remotely.
Powerful, yet extremely quiet in operation
The units are all manufactured using high impact ABS thermoplastics for strength and durability, aesthetics and easy cleaning.
Power is provided by a single phase induction motor with pre-oiled bearings for a long, maintenance-free life.
4
£18.99
4" 5" 6" Inline Extractor Fan Timer or Std Full Kit Ventilation Bathroom Shower
SF100 - 100 m3/h (with or without Timer)
SF125 - On/Off - 150 m3/h (with or without Timer)
SF150 - On/Off - 210 m3/h (with or without Timer)
Fans do not come with wire and will need to be wired
Included in the price:
Fan - Inline fan standard or timer
Internal Grille - Circular White Grille
Ducting - 3m - PVC Ducting
Outside Grille - Fixed Grille White
Clamps- 4 x Clamps Included
Ceiling mounted fan, fan to be mounted within duct
 
TIP:
  
The less ducting you use the more suction (airflow) you will get if using the full 5 meter this will only give a small suction (airflow) we recommend using the shortest run possible
 
- Recommended Length 3m of Ducting MAX
 
- Designed for the safe ventilation of bathrooms, toilets and shower rooms, the SF range of in-line extractor fans remove any risk of an electric shock in wet areas as the fan is mounted remotely.
Powerful, yet extremely quiet in operation
The units are all manufactured using high impact ABS thermoplastics for strength and durability, aesthetics and easy cleaning.
Power is provided by a single phase induction motor with pre-oiled bearings for a long, maintenance-free life.
4
translation missing: en.products.product.regular_price £36.99
translation missing: en.products.product.regular_price £36.99

Manrose SF100W Kit

Designed for use in bathrooms, toilets and shower rooms, the Slimline Wall Fan has a unique profile of only 15mm. 

Utilising a revolutionary design concept, the unit is mounted inside the wall, 175mm from the face of the internal wall which enables installation within the splash area of a shower or bath (where regulations prevent the installation of conventional fans).

Unobtrusive and quiet, the SF100W has an extract rate of 85m3 /hr 23 litres per second

The SF100W fan kits include an in-line tube fan with a mounted spring loaded backdraught shutter, a length of 380mm flexible aluminium telescopic ducting, one white internal and one grey external fixed louvre wall grille, self adhesive cable clips, fixing screws and plugs. 

Easy to follow instructions make installation simple. 

Designed to comply with the Building Regulations on Ventilation (F1)

Login