HRU / PIV / MEV

CFLO100 Heat Recovery Ventilation Condensation 1,2,3 or 4 Rooms Complete Kit
£229.99
Complete Kit please choose from drop down menu

You will get Ducting, T's (if needed), 1 x Alu Tape 45m, and Grilles
1-2 room kit - 2 internal grilles
3 room kit - 3 internal grilles
4 room kit - 4 internal grilles

HRU100 (CFLO100) unit does 27.7 l/s @ Free Air
Remember the more ducting, Bends & Grilles you use the less performance from the fan

2 room kit Example
Extract: bathroom (8 l/s)
Supply: Hall way (6 l/s)
3 Room Kit Example
Extract: En Suit + Bathroom (16 l/s)
Supply: Hall Way (6 l/s)
4 Room Kit Example
Extract: Toilet + En Suit + Bathroom (22 l/s)
Supply: Hall Way (6 l/s)

Extract Rates need when using continuous Ventilation (boost)

Kitchen - 13 l/s
Utility - 8 l/s
Bathroom - 8 l/s
Sanitary Accommodation - 6l/s

If you want to buy some Acoustic Ducting please see: Item number: 280981345234

Wall In line Void/Loft Mounted Heat Recovery Unit

Boost switch comes wired to unit (plug straight in)

** There should never be two lives going to the unit at the same time **
Comes with easy unscrew lid and condensation drain

Extract Air Performance
Boost – 100 m3/hour
Trickle – 30 m3/hour
Intake Air Performance
Boost – 100 m3/hour
Trickle – 30 m3/hour
Power Consumption
Boost - 25w
Trickle – 20w

Features

Designed to run continuously and provide adequate ventilation for bathroom, en suite, shower room, wet room.

Will provide up to 75% heat recovery

(As air is extracted the unit will recover up to 75% of the heat and add it to clean fresh air, and pump it back into your house.)

Eliminate mould and control condensation

Trickle/Boost Option
Loft/void space mounting.
Condensation Drain fitted to bottom of Unit
CFLO100 Heat Recovery Unit/Fan Whole House Ventilation System
translation missing: en.products.product.regular_price £189.99
translation missing: en.products.product.regular_price £189.99

Void/Loft Mounted Heat Recovery Unit

Boost switch comes wired to unit (plug straight in)

** There should never be two lives going to the unit at the same time **

Comes with easy unscrew lid and condensation drain

Extract Air Performance

Boost – 100 m3/hour

Trickle – 30 m3/hour

Intake Air Performance

Boost – 100 m3/hour

Trickle – 30 m3/hour

Power Consumption

Boost - 25w

Trickle – 20w

Features

Designed to run continuously and provide adequate ventilation for a single bathroom, en suite, shower room, wet room.

Will provide up to 75% heat recovery

(As air is extracted the unit will recover up to 75% of the heat and add it to clean fresh air, and pump it back into your house.)

Eliminate mould and control condensation

Trickle/Boost Option

Loft/void space mounting.

Condensation Drain fitted to bottom of Unit

If kit is needed please see our SHOP examples below

HRU100 (CFLO100) unit does 27.7 l/s @ Free Air
Remember the more ducting, Bends & Grilles you use the less performance from the fan

2 room kit Example
Extract: bathroom (8 l/s)
Supply: Hall way (6 l/s)
3 Room Kit Example
Extract: En Suit + Bathroom (16 l/s)
Supply: Hall Way (6 l/s)
4 Room Kit Example
Extract: Toilet + En Suit + Bathroom (22 l/s)
Supply: Hall Way (6 l/s)

Extract Rates needed when using continuous Ventilation (boost)

Kitchen - 13 l/s
Utility - 8 l/s
Bathroom - 8 l/s
Sanitary Accommodation - 6l/s

 

Please choose ducting, fittings and grilles from our eBay shop or call 01564 703737for a quote!

Brookvent 93% Heat Recovery Whole House Extract Supply Unit Fan Summer By Pass
£39.99
 Brookvent Aircycle 1.2
 https://brookvent.co.uk/wp-content/uploads/2015/06/BROOKVENT-aircycle-1.2-Brochure-Heat-Recovery-Ventilation.pdf
 Energy saving efficiency of up to 93%.
Accredited with 'Best Practice' use by the BRE.
SAP Q Listed and approved.
Summer by Pass
In-built Humidity Sensor (Boost activation) Variable: 60% - 90% RH, Factory Set: 70%
Extremely low carbon SFP rating of 0.53 w/l/s. (1 x Wet Room, 1 x Kitchen)
Impressive airflow rate of 40 l/s @ 250 Pa.
Trickle and boost settings for each fan
Frost Protection, Factory Set: 5 Degrees Cel.
Wall mountable or Floor mountable
 Brookvent Aircycle 3.1
https://brookvent.co.uk/wp-content/uploads/2016/01/BROOKVENT-aircycle-3.1-brochure_2016.pdf
 Energy saving efficiency of up to 93%.
Accredited with 'Best Practice' use by the BRE.
SAP Q Listed and approved.
Summer by Pass
In-built Humidity Sensor (Boost activation) Variable: 60% - 90% RH, Factory Set: 70%
Extremely low carbon SFP rating of 0.38 w/l/s. (1 x Wet Room, 1 x Kitchen)
Impressive airflow rate of 80 l/s @ 250 Pa.
Trickle and boost settings for each fan
Frost Protection, Factory Set: 5 Degrees Cel.
Wall mountable or Floor mountable
Please read the following facts before choosing a Heat Recovery Unit
A Heat Recovery Unit less than 70% efficient does not meet UK Building Regulations as a heat recovery unit with an efficiency level under 70% is simply not going to give back the benefits you have invested.
SAP Q
The BRE (Building Research Establishment) independently test heat recovery units and publish results (Appendix SAP Q) for you to see. The tests are carried out in real situations and are independent.
Here we are offering one of the most efficient Heat Recovery Units on the market.
How does it work?
A heat recovery ventilation unit is mounted in your loft and ducted to outside to intake and extract air outlets.
Extract grilles are fitted in your kitchen and wet rooms and ducted to the heat recovery unit.
Supply air grilles are fitted in your habitable rooms; living rooms and bedrooms.
Each wet room is fitted with an extract valve, and each habitable room with a supply grille.
Within the heat recovery unit, heat from the extracted dirty, moist air is transferred to the supply air and pumped back into your house.
CFLO250 Whole House Heat Recovery Unit 550 m3/hr Upto 75% Efficient 7 speed
translation missing: en.products.product.regular_price £239.99
translation missing: en.products.product.regular_price £239.99

Wall In line Void/Loft Mounted Heat Recovery Unit Only

Unit label airflow is incorrect unit does 550 m3/hr on full speed
Boost switch comes wired to unit (plug straight in)

** There should never be two lives going to the unit at the same time **
Comes with easy unscrew lid and condensation drain
Please note all airflows are at free air (No pressure)

Features

W415 x H255 x L450 
70mm added to width for terminal box
60mm spigot length needs to be added to length

speed 1 : 54dB(A)
speed 2 : 52dB(A)
speed 3 : 47dB(A)
speed 4 : 43dB(A)
speed 5 : 38dB(A)
speed 6 : 34dB(A)
speed 7 : 28dB(A)

Designed to run continuously and provide adequate ventilation for a bathroom, en suite, shower room, wet room etc.

Will provide up to 75% heat recovery

(As air is extracted the unit will recover up to 75% of the heat and add it to clean fresh air, and pump it back into your house.)

6" 150mm Spigots on unit

Comes with 7 speeds controller is wired to 2 for trickle and boost

Eliminate mould and control condensation

Trickle/Boost Option included

Loft/void space mounting.

 

Condensation Drain fitted to bottom of Unit

SAHRU150 Passive Heat Recovery Unit Low Cost Whole House Ventilation
translation missing: en.products.product.regular_price £119.99
translation missing: en.products.product.regular_price £119.99

Swiftair Passive Heat Recovery Unit SAHRU150

The SAHRU150 provides balanced heat recovery for commercial and residential areas and is ideal for swimming pools, computer rooms, classrooms, shower rooms and changing areas etc.

A passive heat recovery unit does not come with any fans. They are installed separately in the duct. (Please pictures)

Ÿ Compatible with standard 150mm ducting

Ÿ the unit provides control of condensation and odours.

Ÿ Heat Recovery up to 70%

Ÿ Easy to unscrew lid

Any size fan can be used please see graph in pictures

Fans Not Supplied


HR100R Heat Recovery Fan Heat Exchanger Ventilation Condensation - Vent Axia
£289.99
HR100R Heat Recovery Fan Heat Exchanger Ventilation Condensation - Vent Axia

HR100R Heat Recovery Fan Heat Exchanger Ventilation Condensation - Vent Axia

Manrose/Vent Axia MANHR100R / HR100R 

Wall In line Void/Loft Mounted Heat Recovery Unit
Extract Air Performance
Boost – 70 m3/hour
Trickle – 41 m3/hour
Intake Air Performance
Boost – 70 m3/hour
Trickle – 30 m3/hour
Power Consumption
Boost - 31w
Trickle – 12w
Features

Designed to run continuously and provide adequate ventilation for a single bathroom, en suite, shower room, wet room to Building Regulation Standard.
Will provide up to 70% heat recovery
(as air is extracted, the unit will recover up to 70% of the heat and add it to clean fresh air, and pump it back into your house.)

Eliminate mould and control condensation

Trickle/Boost Option - 
(please choose this option from the drop down menu above).

Loft/void space mounting. Please choose ducting, fittings and grilles from our eBay shop or call 01564 703737for a quote!

Specification

Sound Pressure Level
Boost – 30 dB(A) @ 3m
Trickle – 20 dB(A) @ 3m

 


CFLO250 Heat Recovery Ventilation Condensation 3,4,5,6,8,10 Rooms Complete Kit
£449.99

Please select what you require above 

In this kit you will receive the following:

CFLO250 unit x 1

Reducer 6" to 5" x 4

External grilles x 2

Tee pieces to match selection

Insulated ducting x 5 (50m Total 5")

Internal grilles to match the selection

3 to 6 room kit - 6 internal Grille

4 to 8 room kit - 8 internal Grilles 

5 to 10 room kit - 10 internal grilles 

Alu Tape x 1 



Wall In line Void/Loft Mounted Heat Recovery Unit Only

Unit label airflow is incorrect unit does 550 m3/hr on full speed

Boost switch comes wired to unit (plug straight in)

** There should never be two lives going to the unit at the same time **

Comes with easy unscrew lid and condensation drain
Please note all airflows are at free air (No pressure)

Features

W415 x H255 x L450 
70mm added to width for terminal box
60mm spigot length needs to be added to length

Designed to run continuously and provide adequate ventilation for a bathroom, en suite, shower room, wet room etc.

Will provide up to 75% heat recovery

(As air is extracted the unit will recover up to 75% of the heat and add it to clean fresh air, and pump it back into your house.)

6" 150mm Spigots on unit

Comes with 7 speeds controller is wired to 2 for trickle and boost
Eliminate mould and control condensation
Trickle/Boost Option included
Loft/void space mounting.
Condensation Drain fitted to bottom of Unit

Extract Rates needed when using continuous Ventilation (boost)

Kitchen - 13 l/s
Utility - 8 l/s
Bathroom - 8 l/s
Sanitary Accommodation - 6l/s

Vent Axia LO-Carbon Pozidry Pro Heater Fire Damper Ducting Kit Filter Set
£402.99
PoziDry ProTM
Positive input ventilation for whole house mould and condensation control. Smart SenseTM control allows quick and accurate set up. Variable speed control allows the unit to be effective in a property up to 150m2. Automatic summer shut off stops warm air coming back into the property. Wireless control ready.
 
PoziDry ProTM with Heater
 Positive input ventilation with heater for whole house mould and condensation control. Smart SenseTM control allows quick and accurate set up. Variable speed control allows the unit to be effective in a property up to 150m2. Automatic summer shut off stops warm air coming back into the property. Flexible heater mounting options. Wireless control ready.
 
PoziDry ProTM Fire Damper with Heater (Multi-storey Compliant)
Positive input ventilation with heater and fire damper for whole house mould and condensation control. Smart SenseTM control allows quick and accurate set up. Variable speed control allows the unit to be effective in a property up to 150m2. Automatic summer shut off stops warm air coming back into the property. Flexible heater mounting options. Fire Damper model supplied with relay to fire alarm cut off and intumescent fire protective ducting.  Wireless control ready.
 
F7 Filter Set
F7 filters offer additional filtration removing harmful particulates down  to PM2.5 Stock
 
Ducting kit
Please select the additional ducting kit if needed, this includes:
6M 200MM Flex duct
Worm drive clips/clamps
Ducting Y Piece
Circular supply/exhaust diffuser 200mm (white)
Silavent/Domus Green Line HRX Heat Recovery Fan Summer Bypass Extractor Supply
translation missing: en.products.product.regular_price £1,099.99
translation missing: en.products.product.regular_price £1,099.99

Part of the Silavent Green Line range, the HRX is a highly efficient MVHR appliance, designed to comply with 2010 Building Regulations and lower energy usage. Incorporating a number of userfriendly features that maximise system performance, the HRX is ideal for properties where installation space is restricted. Developed using the latest fan technology, the HRX offers an extremely low Specific Fan Power down to 0.58 W/(l/s) and reduces the build-up of condensation and mould.

 

As an added benefit to developers and house builders looking to lower the Dwelling Emission Rate (DER) required of any new property by Building Regulations, the HRX’s energy efficient fan also helps secure points towards a better SAP rating.

 

Exceeds Parts F and L of 2010 Building Regulations

SAP Appendix Q listed

Compact and extremely lightweight (11.5kg)

Supports kitchen and up to 7 wet rooms

Specific Fan Power down to 0.58W/(l/s)

Heat Recovery Efficiency up to 88%

For a Floor Area of 180m2

Energy efficient EC motors

Easy and quick to install, commission and maintain

Distinct moulded EPP casing improves thermal efficiency and maximises air flow

Wiring centre is mounted remotely, taking away the need to dismantle the unit during installation and preventing moisture from damaging the electrics

Design allows for left or right installation

Manufactured in the UK

 

Optional features:

 

Summer bypass that functions in both chambers and efficiently channels air around the heat exchanger

Glossy, white modern fascia

Frost protection sensor that reacts to temperatures below 5º

Bespoke condensate drainage kit, to remove the build-up of condensate

Controls for remote operation

 

**** Unlike other units in the market place, the HRX features a 100% summer bypass, which maintains air flow performance without compromising on heat exchange efficiency. This is an important feature to consider when specifying summer bypass units.

 

HRX-S – Standard HRX Unit

HRX-B - with summer bypass

HRX-FP - with frost protection

HRX-BFP - with summer bypass and frost protection

HRX-FS - with glossy white fascia

HRX-FB - with glossy white fascia and summer bypass

HRX-FFP - with glossy white fascia and frost protection

HRX-FBFP - with glossy fascia, summer bypass and frost protection

HRX-B-C - Ceiling Mounted


Manrose - Whole House Extract Fan, Bathroom Fan Kitchen
translation missing: en.products.product.regular_price £279.99
translation missing: en.products.product.regular_price £279.99
Please see our shop for more products!
Manivent Whole House Ventilation System - 3 Year Warranty
Ducting and Grilles can be supplied please contact us: 01564 703737
The ManiVent is an ultra slim whole-house ventilation
system incorporating features designed to make
installation and commissioning simpler and costs
effective.
It is suitable for simultaneous ventilation of separate wet
areas in a house or flat gathering wet polluted air and
discharging it to atmosphere.
Each intake spigot of the unit incorporates an auto
air volume regulator which controls the volume and
pressure within the ducts, regardless of the duct lengths.
This automatic feature ensures commissioning is much
quicker. The unit has three integral speed settings and an
over run timer.
The unit can be controlled via a remote switch or sensor
which enables the user to select one of three fan speeds
depending on their particular requirements.
• Low noise levels – designed for continuous operation.
• Option of wall, ceiling and loft mounting.
• Can extract from up to 5 wet rooms simultaneously.
• Eliminates cross contamination due to continuous
operation.
You will receive
MANI 3000AC with run on timer
2 Position switch Boost Switch
2 - 125mm Spigots (Kitchen Extract)
4 - 80mm Spigots
Meets the building regulations document (F1) for continuous running.
• Toilets 6l/s,
• Bathrooms 8l/s
• Utility rooms 8l/s
• Kitchens 13l/s
Performance
Low Medium High
MANHR100W Heat Recovery Fan Heat Exchanger Ventilation Controls Condensation
translation missing: en.products.product.regular_price £252.99
translation missing: en.products.product.regular_price £252.99

MANHR100W with BOOST SWITCH - Made in the UK

3 year warranty

Features & Benefits

Installation in bathrooms/WC’s.
Meets building regulations for Bathrooms and Toilets for system1 intermittent extract and for constant ventilation as per system 4 requirement
Eliminates mould.
Controls condensation.
70% Heat Recovery

Technical Details

Model No. Product type

HR100W Std Heat Recovery Unit
Boost Switch

Performance

HR100W 

Extract Performance m3/h

High 77 
Low 43 

Intake Performance m3/h

High 69 
Low 38 

Watts

High 31 
Low 12 

Sound dB(A) at 3m

High 35
Low 20


HRW150H Wall Mounted 84% Heat Recovery Unit Supply Extract Fan Humidity Bathroom
translation missing: en.products.product.regular_price £169.99
translation missing: en.products.product.regular_price £169.99

Swiftair HR-W150H

 

The Swiftair HR-W150H range of product is a through the wall heat recovery fan for use in areas such as bathrooms and WCs.

 

The unit is fitted with a 24V DC motor and

are supplied with a Switch for Humidity and 24 hours running function.

On 24 hour running setting the power consumption is 2 Watts.

 

The twin impeller and heat exchanger arrangement simultaneously supplies and

extracts air while transferring heat from the stale exhaust airflow to the fresh intake airflow.

 

This provides up to 84% heat recovery from the stale extracted air.

 

The Function as follow:

 

humidity sensor models:

(A): 40-60% setting. when humidity is in 40-60%, the fan will be on under 2300rpm. when the humidity is below 40%, the fan is off automatically.

 

(B): 60-100% setting. when humidity is over than 60%, the fan will be on under 3000rpm.

 

24hours continuous operation model: by manual switch to this model operation, when switch to this model of operation, the fan will be on 2000rpm for 24 hours on.

 

Controlled by a switch pre-wired to fan.

 

 


Heat Recovery Ventilation Fan 10 Room Complete Kit Condensation Remover Bathroom
translation missing: en.products.product.regular_price £646.99
translation missing: en.products.product.regular_price £646.99

Please see our shop for more products!

What you will receive:
10 x AG6 (Air Valves)
9 x T Piece 6"
80m of Insulated Ducting (8 boxes of 10m)
2 x FG6 Fixed Grille
2 x STUBE150 fans (460 m3/hr Free Air)
1 x Variable Speed Controllers
1 x SAHRU150 Heat Recovery Block
SAHRU150

The SAHRU150 provides balanced heat recovery for commercial and residential areas and is ideal for swimming pools, computer rooms, classrooms, shower rooms and changing areas etc..

A passive heat recovery unit does not come with any fans. They are installed separately in the duct. (Please pictures)

Compatible with standard 150mm ducting
The unit provides control of condensation and odours.
Heat Recovery up to 70%
Easy to unscrew lid
Swiftair - STUBE Fan

STUBE fans are applied for supply and exhaust ventilation systems of commercial, office and other premises. Compatible with Ø 100, 125, 150mm round air ducts.

Corrosion-resistant durable casing, these models are the perfect solution for the installation in exhaust ventilation systems in humid premises such as bathrooms, kitchens etc.

•The impeller with backward curved blades is powered by a single-phase asynchronous AC motor with external rotor including the following features:

•A dynamic balanced impeller with backward curved blades balanced in two planes.
•Overheating protection with automatic restart.
•Maintenance-free ball-bearings used with motors and designed for at least 40 000 hours operation.
•Motor protection rating IP X4

Installation to the wall or ceiling can be performed by means of mounting brackets (included in the delivery). The fan can be mounted at any angle. Electric connection and installation shall be performed in compliance with the manual and the wiring diagram on the terminal box.


Heat Recovery Fan Whole House Ventilation BOTTOM ACCESS
translation missing: en.products.product.regular_price £399.99
translation missing: en.products.product.regular_price £399.99


Please see our shop for more products!

MANHR100RS - 3 Year Warranty - MADE IN THE UK (Manrose)

Ducting and Grilles can be supplied please contact us: 01564 703737

Features & Benefits

• Controls condensation and odours - saves energy.
• Eliminates mould growth.
• 70% Heat Recovery.
• Extremely quiet operation.
• E.g. extract from 1 wet room or kitchen, supply two rooms

Technical Details

Model No. Product type

You will receive:

MANHR100RS Std Heat Recovery Unit Bottom Access

Boost Switch
Performance
HR100R
Weight
Kg 5.6
Extract Performance m3/h
Boost 70 Trickle 41
Intake Performance m3/h
Boost 70
Trickle 30
Watts
Trickle 19
Sound dB(A) at 3m
Boost 30
Trickle 20

 


CFLO100 Heat Recovery Bathroom Fan Condensation ventilation complete 1 or 2 room
translation missing: en.products.product.regular_price £199.99
translation missing: en.products.product.regular_price £199.99

HRU100 Heat Recovery Unit
Boost Switch
100mm Internal Circular Grilles White x 2 (E.g. 1 Extract, 1 Supply)
100mm External Fixed Louvre Grille x 2
Alu Duct x 1 (10 meter inc) 
Alu Tape 45m x 1 

Void/Loft Mounted Heat Recovery Unit

Boost switch comes wired to unit (plug straight in)

** There should never be two lives going to the unit at the same time **

Comes with easy unscrew lid and condensation drain

Extract Air Performance
Boost – 100 m3/hour
Trickle – 30 m3/hour
Intake Air Performance
Boost – 100 m3/hour
Trickle – 30 m3/hour

Power Consumption
Boost - 25w
Trickle – 20w

Features

Designed to run continuously and provide adequate extract ventilation for a single bathroom, en suite, shower room, wet room.

Will provide up to 75% heat recovery

(As air is extracted the unit will recover up to 75% of the heat and add it to clean fresh air, and pump it back into your house.)

Eliminate mould and control condensation

Trickle/Boost Option

Loft/void space mounting.

Condensation Drain fitted to bottom of Unit

Please choose ducting, fittings and grilles from our eBay shop or call 01564 703737for a quote!

 

 

Brookvent Kit 93% Heat Recovery Whole House Extract Supply Fan Summer By Pass
£919.99
 Brookvent Aircycle 1.2 Kit
 
In this kit you we get the following 
Tee peices
50m of Insulated 5" ducting 
Grilles for the selection made 
2 x External grilles 
1 x ALU tape
 Energy saving efficiency of up to 93%.
Accredited with 'Best Practice' use by the BRE.
SAP Q Listed and approved.
Summer by Pass
In-built Humidity Sensor (Boost activation) Variable: 60% - 90% RH, Factory Set: 70%
Extremely low carbon SFP rating of 0.53 w/l/s. (1 x Wet Room, 1 x Kitchen)
Impressive airflow rate of 40 l/s @ 250 Pa.
Trickle and boost settings for each fan
Frost Protection, Factory Set: 5 Degrees Cel.
Wall mountable or Floor mountable
Please read the following facts before choosing a Heat Recovery Unit
A Heat Recovery Unit less than 70% efficient does not meet UK Building Regulations as a heat recovery unit with an efficiency level under 70% is simply not going to give back the benefits you have invested.
SAP Q
The BRE (Building Research Establishment) independently test heat recovery units and publish results (Appendix SAP Q) for you to see. The tests are carried out in real situations and are independent.
Here we are offering one of the most efficient Heat Recovery Units on the market.
How does it work?
A heat recovery ventilation unit is mounted in your loft and ducted to outside to intake and extract air outlets.
Extract grilles are fitted in your kitchen and wet rooms and ducted to the heat recovery unit.
Supply air grilles are fitted in your habitable rooms; living rooms and bedrooms.
Each wet room is fitted with an extract valve, and each habitable room with a supply grille.
Within the heat recovery unit, heat from the extracted dirty, moist air is transferred to the supply air and pumped back into your house.
4 or 8 Room Whole House Heat Recovery Kit Bathroom Shower Extract Supply 75%
translation missing: en.products.product.regular_price £499.99
translation missing: en.products.product.regular_price £499.99

 

Please see our shop for more products!

Swiftair Passive Heat Recovery Unit

Please see below:

SAHRU150 + STUBE125 x 2
Controller x 1
Insulated ducting x 5 (50m)
Internal grilles x 8
T pieces x 7
External Grille x 2
SALUTAPE x 2
Connectors x 10

You will get 250 m3/h at free are through the heat recovery block once ducting is added recovery and air volume will reduce

(Wire an plug supplied plug straight in and turn on)

If you do not wish to use the plug please wire directly into terminal (controller will need to be wired to terminal)

STUBE125 - 400 m3/h 

Up to 277 Pa STUBE125 
65w STUBE125

NOISE LEVEL 40 dBA @ 3m - STUBE125

Swiftair Passive Heat Recovery Unit SAHRU150

The SAHRU150 provides balanced heat recovery for commercial and residential areas and is ideal for swimming pools, computer rooms, classrooms, shower rooms and changing areas etc.

A passive heat recovery unit does not come with any fans. They are installed separately in the duct. (please pictures)

Compatible with standard 150mm ducting
Ÿ The unit provides control of condensation and odours.
Ÿ Heat Recovery up to 70%
Ÿ Easy to unscrew lid
Any size fan can be used please see graph in pictures

250 m3/h Whole House Heat Recovery fan Bathroom Shower Extract Supply 75%
translation missing: en.products.product.regular_price £279.99
translation missing: en.products.product.regular_price £279.99
Swiftair Passive Heat Recovery Unit SAHRU150 + STUBE125 & Controller
You will get 250 m3/h at free are through the heat recovery block once ducting is added recovery and air volume will reduce
(Wire an plug supplied plug straight in and turn on)
If you do not wish to use the plug please wire directly into terminal (controller will need to be wired to terminal)
STUBE125 - 400 m3/h
Up to 277 Pa STUBE125
65w STUBE125
NOISE LEVEL 40 dBA @ 3m - STUBE125
Swiftair Passive Heat Recovery Unit SAHRU150
The SAHRU150 provides balanced heat recovery for commercial and residential areas and is ideal for swimming pools, computer rooms, classrooms, shower rooms and changing areas etc.
A passive heat recovery unit does not come with any fans. They are installed separately in the duct. (Please pictures)
Ÿ Compatible with standard 150mm ducting
Ÿ the unit provides control of condensation and odours.
Heat Recovery up to 70%
Ÿ Easy to unscrew lid
Any size fan can be used please see graph in pictures

Login